Table of Contents
Advertisement
Touch one of the following options:
2.
• Show my number: allows you to select how your ID is handled
when an outgoing call is initiated.
• Auto reject: sets the phone to automatically reject incoming calls or
messages.
• Answering call: selects how your phone answers incoming calls.
Enable Answering mode, then select one of the following methods
for answering the phone:
– Answering key allows you to press a key to answer the phone.
– Automatic answering automatically answers after a period of time.
Selections are: Off, after 1 second, after 2 seconds, after 4 seconds, or
after 5 seconds.
• Prefix dialling: when activated, this feature automatically prepends
a string of numbers (such as an area code) to any dialed number.
This feature is useful for international dialing, or dialing within an
area code where all the calls you make for a period of time use one
prefix. For more information, refer to "Prefix Dialing" on
page 43.
• Reject call with message: allows you to send a mesage
immediately after rejecting a call.
• Call status tones: sets a tone to play for the following status tones:
Call connect tone, Minute minder, or Call end tone. Touch each type
of status tone you want to play.
• Alerts on call: activates an alert tone for new messages being
received during an active call.
134
Configuring Voice Calls
To configure voice calls:
From the Home screen, touch
1.
settings
Voice call.
Touch one of the following options:
2.
• Always forward: incoming calls are re-routed to a secondary
number that you specify.
• Forward when busy: forwards all your calls to voicemail when your
phone is busy.
• Forward when unananswered: automatically forwards to your
voicemail number when the phone is not answered, and otherwise
allows you to enter a voicemail number.
• Forward when unreachable: automatically forwards to your
voicemail number when the phone is not in service, or is turned off.
Fixed Dialing Numbers
Fixed Dial Number (FDN), allows you to restrict outgoing calls to a
limited set of phone numbers.
Enabling FDN
From the Home screen, touch
1.
settings
Fixed Dialing Numbers.
Touch Enable FDN.
2.
At the prompt, enter your PIN2 code and touch OK.
3.
Settings
Call
Settings
Call
Advertisement
Table of Contents
