Activating Voice Recognition; Using Digit Dial - Samsung VGA1000 User Manual

Activating Voice Recognition

Voice recognition allows you to say commands to perform
common functions supported by your phone. There is no voice
training required to use the voice recognition feature. You
simply say the pre-designated command displayed on your
screen in a normal tone of voice to perform the desired
function.
To activate voice recognition:
1. Press the navigation key left or press and hold
2. The phone prompts you to say a voice command. Wait for
the beep and then say one of the following commands:
Digit Dial
Name Dial
Voice Memo
Phone Book
Browser
Games
When it recognizes one of these commands, the phone
launches the associated application. If the phone does not hear
a command within approximately eight seconds, it de-activates
voice recognition without taking any action.
Note:
If you want to use a different button to activate voice recognition,
press
assignments, including the button used to launch "Voice Dial," which is the
voice recognition application.

Using Digit Dial

Digit Dial allows you dial any valid 7 or 10 digit North American
phone number by speaking the number naturally, without
pausing between the digits.
Tips for using Digit Dial:
Digit Dial works best in quieter environments.
When saying a number, speak at a normal speed and say
each digit clearly. There is no need to pause between digits.
Section 2: Understanding Your PCS Phone
2I: Using Your Phone's Voice Services
Launch Pad
for . On this menu, you can change button
.
87