Activating Voice Recognition - Samsung SPH-M300 User Manual

Activating Voice Recognition

In addition to Sprint Voice Command (page 215), built-in
voice recognition software allows you to say commands to
perform common functions supported by your phone. There
is no voice training required to use the voice recognition
feature. You simply say the predesignated command
displayed on your screen in a normal tone of voice to perform
the desired function.
To activate voice recognition:
1.
Press and hold
command.)
2.
Wait for the beep and then say one of the following
commands:
When it recognizes one of these commands, the phone takes
the corresponding action. If the phone does not hear a
command within approximately eight seconds, it deactivates
voice recognition without taking any action.
Note: If you want to use a different button to activate voice
recognition, press the left softkey for Menu and select Settings .
Press 9 for Launch Pad . On this menu, you can change button
assignments, including the button used to launch "Voice
Dial," which is the voice recognition application.
128
Voice Dial
Contacts
Voice Memo
Status
My Phone #
Section 2H: Using Your Phone's Voice Services
. (The phone prompts you to say a