Table of Contents
Advertisement
Exploded and assembling View
7
1) Remove conductivity TAPE for FPCB fixing with tweezers
2) Open the actuator.
3) Disjoint the LCD FPCB from the LCD main connector.
1) When you dismantle a mobile phone, be careful about the warp of
the framework or damage of the hook.
10
1) Separate SUB BOARD and LCD module.
2) When do it, separate carefully from BOARD upper direction.
1) When you separate, be careful about the warp of the board or
damage of component.
8
1) Separate SLIDE UPPER and SUB BOARD ASS' Y.
8-2
SAMSUNG Proprietary-Contents may change Without notice
This Document can not be used without Samsung's authorization
9
1) Remove LCD FPCB CONTACT TAPE with tweezers.
2) Open the actuator and Disjoint the LCD FPCB from the LCD
connector.
3) When you use tweezers, be careful a damage of component.
Advertisement
Table of Contents
