THUNDER TIGER ZT2 Instruction Manual

1/18 2wd mini monster truck & racing truck

Advertisement

Quick Links

1/18
2WD MINI MONSTER TRUCK & RACING TRUCK
TH
NO.6223-F
INSTRUCTION MANUAL
Before assembling, please read the instruction manual first
WARRANTY
Thunder Tiger Corporation guarantees this model kit to be free from defects in both material and workmanship.
The total monetary value under warranty will in no case exceed the cost of the original kit purchased. This warranty
does not cover any components damaged by use or modification. Part or parts missing from this kit must be
reported within 60 days of purchase. No part or parts will be sent under warranty without proof of purchase. To
receive part or parts under warranty, the service center must receive a proof of purchase and/or the defective part
or parts. Should you find a defective or missing part, contact the authorized Thunder Tiger Service/Distributor
nearest you. Under no circumstances can a dealer or distributor accept return of a kit if assembly has started.

Advertisement

Table of Contents
loading

Summary of Contents for THUNDER TIGER ZT2

  • Page 1 Before assembling, please read the instruction manual first WARRANTY Thunder Tiger Corporation guarantees this model kit to be free from defects in both material and workmanship. The total monetary value under warranty will in no case exceed the cost of the original kit purchased. This warranty does not cover any components damaged by use or modification.
  • Page 2: Items Required For Operation

    INTRODUCTION Thank you for purchasing the Thunder Tiger ZK-2/ZT-2 Mini- Monster truck/Mini Racing Truck. Thunder Tiger strives to bring you the highest level of quality and service we can provide. We race and test our products around the world to bring you state-of-the-art items.
  • Page 3 The Radio Control System The Transmitter Thunder Tiger ZK-2/ZT-2 Mini- Monster truck/Mini Racing Truck features with an advanced PCM FM radio control system, including a micro servo, RS-10 Receiver/Speed Control and a ACE Jaguar 2-Ch FM PCM pistol grip transmitter. Before operating your new radio system, please take a few minutes to familiarize yourself with the various features of the system by reading the introduction below, 1.
  • Page 4 The RS-10 Receiver/Speed Module 1. Receiver & ESC: Receives the signal from the transmitter to control your vehicle and control the (Electric Speed Control) power input and rotating direction of the motor. 2. Crystal: To change the channel it receives 3.
  • Page 5: Preparing The Radio

    PREPARING THE RADIO a. Install the antenna into transmitter b. Check the frequency printed on the transmitter crystal. c. Check the frequency printed on the RS ESC/Receiver module and crystal. Make sure it matches with the transmitter crystal. Make sure no one will operate on the same frequency when you are. When there is a radio glitch, it will most likely be caused by improper crystal, damaged crystal, or people operating on the same frequency.
  • Page 6: Steering Adjustment

    STEERING ADJUSTMENT a. Check the radio steering functions. With the radio transmitter and receiver on, turn the steering wheel/stick to the left. The front tires/wheels should turn left accordingly. If not, flip the steering servo reverse switch. b. Return the steering wheel/stick to neutral. The front tires/wheels should point straight forward. If not, use the steering trim lever to correct it.
  • Page 7: Ride Height Adjustment

    Hop-ups Thunder Tiger is pleased to inform our customers that you don't need to wait for long-term developed optional parts anymore. Thunder Tiger also offers you the chance to turn your truck into "Factory" version! Thunder Tiger offers a series of optional parts for your appreciative choosing. It's much durable, faithful and perfect fitting than any other aftermarket hop-up parts made for your mighty truck.

This manual is also suitable for:

Zk2

Table of Contents