York HFG02 Operation Manual page 3

HFG02 Operation Manual
Limited Warranty
York EMC Services warrants each HFG02 to be free
from defects in material and workmanship for a period of
one year from the date of shipment to the purchaser.
This warranty extends to the original purchaser only. It
does not apply to any product or parts subject to misuse,
neglect, accident, unauthorised service or abnormal
conditions of operation.
In the event a product covered by this warranty fails,
York EMC Services, will, without charge, repair and
recalibrate the instrument if returned to their test
laboratory within one year of the original purchase –
provided that York EMC Services examination discloses,
to its satisfaction, that the product is defective. York EMC
Services may, at its option, replace the product in lieu of
repair. If the defect was caused by misuse, neglect,
accident, unauthorised service or abnormal conditions of
operation, repairs will be billed at a nominal cost. In such
cases, an estimate will be provided before work is
started, if requested by the purchaser.
For warranty service, contact York EMC Services.
Provide the serial number of the equipment and
complete details regarding the failure. You will then be
given shipping instructions. Return the instrument to the
factory. Repairs will be made and the equipment will be
returned to you. York EMC Services assumes no
responsibility for loss of, or damage to, products in
transit.
York EMC Services
Page 3 of 25 Doc. No. Y0321/DOC/024 Rev. 3