Calibration - York HFG02 Operation Manual

EUT Mode
Load Operation
Setting
Intermittent 8.33 Hz flicker (50 Hz Test Supply detected)
flicker
Table 4: Typical Pst and Plt results measured to EN/IEC 61000-3-3

6.4 Calibration

The HFG02 is supplied with a manufacturer's calibration certificate.
It is recommended that the HFG02 should be periodically checked to ensure
damage or long-term changes have not altered the output. The periodicity of these
checks is typically determined by the quality assurance regime employed by the
user, however it is recommended that the HFG02 output be retested annually. This
service is available from York EMC Services and can be arranged through your
supplier.
York EMC Services
HFG02 Operation Manual
Page 21 of 25 Doc. No. Y0321/DOC/024 Rev. 3
Pst Plt
1.07/0.74 0.94