Table of Contents
Advertisement
PUK
The 8-digit PUK (PIN Unblocking Key) is required to change a disabled
PIN. The PUK may be supplied with the SIM card. If not, or you have lost it,
contact your service provider.
To re-enable your PIN:
1. Enter the PUK and press the OK soft key.
2. Enter a new PIN of your choice and press the OK soft key.
3. When the Confirm New PIN message displays, enter the same code
again and press the OK soft key.
If you enter an incorrect PUK ten times in succession, the SIM card
becomes invalid. Contact your service provider for a new card.
PIN2
The PIN2 (4 to 8 digits), supplied with some SIM cards, is required to
access specific functions supported by those cards.
If you enter an incorrect PIN2 three times in succession, the code is
disabled and you cannot access the functions until you re-enable it by
entering the PUK2.
To change the PIN2, see the Security section in "Set Phone" on page 146.
PUK2
The 8-digit PUK2 (PIN Unblocking Key 2), supplied with some SIM cards, is
required to change a disabled PIN2. If you lose the code, contact your
service provider.
To re-enable your PIN2:
1. Enter the PUK2 and press the OK soft key.
Access Codes
36
Hide quick links:
Advertisement
Table of Contents
