Samsung SGH-A736 User Manual page 170

♦
Auth Type: Select the type of authentication used for this WAP
connection (None, Normal, or Secure).
♦
User ID: Enter the User ID required to connect to the network.
♦
Password: Enter the password required to connect to the network.
♦
Protocol: Set the connection protocol used by the WAP browser: WAP,
HTTP, or Other.
♦
Home URL (WAP or HTTP only): Enter the URL address of the page to
be used as your home page.
♦
Gateway Address (WAP only): Enter the gateway address of the proxy
server.
♦
Port (HTTP only): Enter the connection port.
♦
Linger Time: Set a time period after which the network is disconnected
if there has been no new data traffic during that time.
♦
Advanced Settings: Allows you to configure some of the IP-specific
information: Static IP, Static DNS, Server information, and Traffic Class.
♦
Static IP: Specify if you want to manually enter an IP address. If you
want the IP address to be automatically assigned by the server,
remove the check mark.
♦
Local Phone IP: Enter the IP address obtained from the network
operator. This option is available only if you checked the Static IP
option.
♦
Static DNS: Specify if you want to manually enter the Domain Name
Server (DNS) address. If you want the address to be automatically
assigned by the server, remove the check mark.
♦
Server 1/Server 2: Enter the Domain Name Server (DNS)
addresses.
♦
Traffic Class: Select the traffic class: Conversation, Streaming,
Interactive, Background, or Subscribed.
Settings
164