Table of Contents
Advertisement
Warning! For connection to an electrical supply not located in North America, you must use an
adapter of the proper configuration for the power outlet. Use of the wrong adapter could damage
your phone and void your warranty.
1. Plug the connector of the travel adapter into the jack on the right side of
the phone.
2. Plug the adapter into a standard AC wall outlet. If the phone is off, the
display indicates that the phone is charging. If the phone is on, the bars
in the battery icon flash to indicate charging.
3. When the phone is fully charged, the message "Battery Full" appears
on the display or the bars in the battery icon stop flashing.
4. Unplug the adapter from the power outlet and disconnect it from the
phone by gently pulling the connector out of the jack.
Note: To avoid damaging the phone, you must unplug the adapter before removing the battery
from the phone.
Note: The phone is also charged when connected to the USB port of a PC using the USB cable.
Low Battery Indication
When only a few minutes of talk time remain, a warning tone sounds, the
"Low Battery" message appears on the display and the empty battery icon
Getting Started
15
Advertisement
Table of Contents
