Table of Contents
Advertisement
Configuring Camera Options
In Capture mode, press the Options
1.
the camera module.
The following options are available:
• Record video: allows you to record an audio file while video taping.
• Shooting Mode: allows you to assign what sequence is followed when a
photograph is taken.
- Single shot: allows you to take just one photo.
- Multi-shot: takes a succession of consecutive photos. Press the
key to set the number of shots to either:
- 6 shots, Normal
- 6 shots, High
- 9 shots, Normal
- 9 shots, High
- 15 shots, Normal
- 15 shots, High
- Mosaic style: takes up to four photos and then groups them together into a
single final photo. Press the Select soft key to set the size of these mosaic
photos to either:
- 4 up
- 9 up
- or 13 other mosaic patterns from which to choose
• Effects: allows you to change the color tone or apply special effects to the
photo.
- Options include: No Effects, Black & White, Negative, Sepia, Emboss, Sketch,
and Aqua.
• Frames: allows you to select a custom frame border for your photo. Choose
from one of the 30 available frames.
• Timer: allows you to set a time delay before the camera takes the photo. Select
the length of delay you want. When you press the
camera takes the photo after the specified time has elapsed.
• Default destination: allows you to Remove a current destination location or
Change the current location by establishing a new folder in which to place the
photo(s). Select from the following options: Recent recipients, Phonebook, Phone
number, E-mail address, My Album, or My Journal.
• Go to Photos: takes you to your Photos folder.
• Camera Settings: allows you to change the Function and Setup settings.
- Photo settings - refer to the following.
- Setup - refer to the following.
132
soft key to use various options for
or
Select soft
key, the
Advertisement
Table of Contents
