Switch Leds - IBM RackSwitch G8264CS Installation Manual

USB port
The USB port allows you to connect a USB drive to the switch. You can copy files
from the switch to the USB drive, or from the USB drive to the switch. You can also
start the switch using files on the USB drive.
For more information about using the USB drive, see the RackSwitch G8264CS
Release Notes.

Switch LEDs

Two LED stacks provide system status and port link status. The following illustration
shows the system LEDs.
Figure 5. System status LEDs
The system LEDs are described in the following table.
The System LEDs are located on the front panel and are described in the following
table.
Table 4. System LED descriptions
Function Master
Total Power Failure Off
Service Required Flash green
Power Supplies OK Not applicable
Power Supply Failure Not applicable
Fans OK Not applicable
Fan Failure Not applicable
Stack Master On
Stack Off
Backup/Member
Stack Error On
Non-Stack Member Off
RJ-45 LEDs
Status LEDs for the RJ-45 ports are located on the front panel and are described in
the following table.
10
IBM RackSwitch G8264CS: Installation Guide
Table 3. System LEDs
Symbol
M
S
!
Member
Off
Flash green
Not applicable
Not applicable
Not applicable
Not applicable
Off
On
On
Off
Description
Stacking master LED
Stacking member LED
Power supplies and power input status
Service LED
Power supply
Off
Flash green
Steady green
Flash green
Not applicable
Not applicable
Not applicable
Not applicable
Not applicable
Not applicable
Service
Off
Flash blue
Not applicable
Not applicable
Not applicable
Not applicable
Off
On
On
Off