Switch Leds - IBM G8052 Installation Manual

Switch LEDs

Two LED stacks provide system status and port link status. The following illustration
shows the system LEDs.
System status LEDs
Figure 5. System status LEDs
The system LEDs are described in the following table.
The following table describes the system LEDs.
RackSwitch G8052
Table 3. System LEDs
Symbol
M
S
!
Table 4. System LED descriptions
Function Master
Total Power Off
Failure
Service Required Flash green
Power Supplies Not applicable
OK
Power Supply Not applicable
Failure
Fans OK Not applicable
Fan Failure Not applicable
Stack Master On
Stack Off
Backup/Member
Stack Error On
Non-Stack Off
Member
Description
Stacking master indicator
Stacking member indicator
Power supplies and power input status
Service indicator
Member Power supply
Off Off
Flash green Flash green
(Note 1) (Note 2)
Not applicable Steady green
Not applicable Flash green
Not applicable Not applicable
Not applicable Not applicable
Off Not applicable
On Not applicable
On Not applicable
Off Not applicable
Service
Off
Flash blue (Note
3)
Not applicable
Not applicable
Not applicable
Not applicable
Off
On
On
Off
9
Chapter 1. Introduction