Table of Contents
Advertisement
2.2 Mounting the Center Adaptor to a Rack
By using the Rack Mount Connecting Fitting (sold separately), 3 or 4 connected center
adaptors can be mounted to a rack.
Prepare the Rack Mount Connecting Fitting (BY-HCA10A), which includes the following
items.
– Mounting bracket (2 pcs.)
– Underside continuous connecting bracket (2 pcs.)
– Screw (Flat-head M3´6: 32 pcs.)
– Screw (M3´6: 6 pcs.)
IMPORTANT
•
Make sure to use the screws included with the BY-HCA10A.
Mounting 3 or 4 center adaptors to a rack
1. Connect the center adaptors together using the BY-HCA10A underside continuous
connecting brackets with the screws included with the BY-HCA10A.
•
Connecting 3 center adaptors
Place a center adaptor on both ends of the underside continuous connecting
brackets.
(Recommended torque 0.4-1.0 N·m {4.1-10.2 kgf·cm})
Screw (Flat-head M3x6: 24 pcs.)
2 Mounting the Unit
Underside continuous
connecting bracket
Installation Guide
25
Advertisement
Table of Contents
