Creating and Sending a Picture Message
1. In standby mode, press the Message (right) soft key
(
), then press
for Picture Message. The Create Pic Msg screen
appears in the display with the Send To field highlighted.
Tip: You can also access Messages by pressing the Menu (left) soft key
(
), and then press
2. Address your message by selecting contacts and/or
entering number(s) or email address(es) of message
recipient(s).
(See Step 2 of "Creating and Sending a Text Message"
on page 98 for more information on addressing your
message.)
3. After addressing your picture message, the Subject field
becomes highlighted.
4. Enter the Subject text using the keypad.
(See Step 4 of "Creating and Sending a Text Message"
on page 98 for more information on choosing a text entry
method, also see "Section 5: Entering Text" on page 69
for more information on using text entry methods.)
5. Press the Down navigation key. The Text field becomes
highlighted.
6. Enter the message text using the keypad.
(See Step 4 of "Creating and Sending a Text Message"
on page 98 for more information on choosing a text entry
method, also see "Section 5: Entering Text" on page 69
for more information on using text entry methods.)
100
(for Send Message) and
@
)
)
for Messages.
@
)
)