Tty; Voicesignal - Samsung SCH-u620 Series User Manual

TTY

Your phone is fully TTY compatible. Connect the TTY equipment to the headset jack,
which is located on the left side of the phone. Before you can use your phone with a
TTY device, you'll need to enable TTY functions in the phone.
Press
1.
Tools and press
Press
2.
Press
3.
A warning appears in the display stating "ENABLING TTY WILL DISABLE
4.
HEADSET AUDIO. CONTINUE?"
Use the up or down navigation key to highlight Yes and press
proceed to TTY MODE screen.
Use the up or down navigation key to highlight No and press
to Call Settings menu.
Use the up or down navigation keys to select one of the following:
5.
• TTY Full
• TTY + Talk (VCO)
• TTY + Hear (HCO)
• TTY Off
Press
6.

VoiceSignal™

VoiceSignal is advanced speech recognition software that can be used to activate a
wide-variety of functions on your phone. VoiceSignal software automatically voice
activates all contacts for voice dialing and searching, no pre-recording or training
needed. Speak phone numbers naturally to dial, and use voice commands to launch
applications and navigate phone menus.
VoiceSignal Settings
You can adjust the settings and preferences for VoiceSignal by opening Voice
Commands menu. Using this menu, you can change the following Voice Command
features:
Tips for adapting Digit Dial
•
Digit Dial Adaptation
•
Reset Digit Dial Adaptation
•
Call Digit Dialing
•
28
MENU. Use the navigation key to highlight
Call Settings.
TTY Mode. The TTY Mode screen displays.
to make your selection. The TTY MODE SET screen displays.
Settings &
to
to return