Samsung SCH-u410 Series User Manual page 34

VoiceSignal Commands
The following is a list of functions that you can perform using VoiceSignal speech
recognition on your phone.
Call <Name or #>: Dial by saying a Name in your Contacts List or a Name and a
•
Location (home, work, mobile).
Send <Msg Type>: Send a text or picture message to a number or to someone in
•
your Contacts List.
Lookup <Name>: Open the contact record for any name in your Contacts List.
•
Go To <Menu>: Opens the specified Main Menu item.
•
Check <Item>: Provides details of your phone status, voicemail messages,
•
missed calls, time, battery level, signal strength and master volume level.
My Account: Opens My Account on VZW Services mobile web page
•
Help Guide: Provides a helpful tutorial on how to use VoiceSignal.
•
Call Name Dialing: Contact Name
To use Name Dial, you'll need to have entries stored in your Contacts list. For more
information, refer to "Adding a Contact" on page 48.
From the main screen, press and hold the Voice Commands key (
1.
After a brief pause, a list of optional commands appears in the display and
2.
the audio prompt "Please say a command" plays through the
speakerphone.
Say "Call" at a distance of 3-12 inches from the phone in a natural voice.
3.
"Please say the Name, Number, Voicemail or Last Number" plays through
4.
the speakerphone.
To use Name Dialing, say the name of the contact that you want to dial.
5.
The name that you said is repeated through the speakerphone and your
6.
phone dials the number (or prompts you to select which number to dial if
more than one phone number is stored for that contact).
If VoiceSignal is not sure of the name that you said, a list of possible
7.
matches appears in the display.
You're asked to confirm the correct name as VoiceSignal displays the
8.
results. Say "Yes" or "No" to confirm or reject the number when prompted.
VoiceSignal repeats the number that you selected and dials that number.
9.
31
).