Removing The Half Fairings - Honda CBF600S 2006 Owner's Manual

REMOVING THE HALF FAIRINGS

(CBF600S/SA)
The side fairings (1) must be removed in order
to perform maintenance in the area of the
headlight unit.
Removal:
1. Remove the two upper hex screws (2).
2. Remove the lower stud (3) from its seat by
pressing it in the centre and then
withdrawing it.
3. Disengage tabs (4) from their locations,
extract internal interlocking feature (5) on
the tank and slide the half fairing forwards
until it is freed from the front interlocking
feature (6).
4. Disconnect the front turn signals cable
connector.
Installation:
1. Reassemble the parts by following the
removal procedure in reverse.
54
(5)
(6)
(3)
(1) Left half fairing
(2) Socket screws
(3) Stud
(4) Tabs
(2)
(4)
(5) Internal
interlocking feature
(6) Front interlocking
feature
(1)