MAJOR COMPONENTS
(Information you need to operate this motorcycle)
SUSPENSION
The rear shock absorber (1) has 7 adjustment
positions for different load or riding conditions.
(1)
Use a pin spanner (2) to adjust the rear shock.
Position 1 is for light loads and smooth road
conditions. Positions 2 to 7 increase spring
preload for a stiffer rear suspension, and can
be used when the motorcycle is heavily
loaded.
(2)
Standard position: 3
The rear shock absorber assembly includes a
damper unit that contains high pressure nitrogen
gas. Do not attempt to disassemble or service
the damper; it cannot be rebuilt and must be
replaced when worn out. Disposal should only
(1) Shock absorber
(2) Pin spanner
be done by your Honda dealer.
The instructions found in this owner's manual
are limited to adjustment of the shock assembly
only.
22