Sony VENICE MPC-3610 Operating Instructions Manual page 37

000 37
3. Camera Operations: User Functions Screen
Assignable Button Function
setting
SxS Slot Change Switches the active slot when two SxS memory
cards are inserted.
Switches between A and B each time the key is
pressed.
Fan Mode Sets the fan control mode.
Switches between Auto  Max  Off in Rec/
Auto  Off in Rec/Max each time the key is
pressed.
Format Media AXS Slot A Formats media in AXS slot A.
Format Media AXS Slot B Formats media in AXS slot B.
Format Media SxS Slot A Formats media in SxS slot A.
Format Media SxS Slot B Formats media in SxS slot B.
APR Executes APR.
Lens Interface Selects the lens interface.
Switches between Off  Type C each time the
key is pressed.
VF Highlight Clip Ind Turns the function to display clipped highlight
areas in red in the viewfinder on/off.
Auto White Balance Executes auto white balance.
Iris Open (1/16 stop) Opens the lens iris.
Press and hold to open the iris until fully open.
This function is available when an E mount lens
with power iris is attached.
The setting is in 1/16 stop increments, whereas
the iris indication is in units of 1/3 stop
increments.
Iris Close (1/16 stop) Closes the lens iris.
Press and hold to close the iris until fully closed.
This function is available when an E mount lens
with power iris is attached.
The setting is in 1/16 stop increments, whereas
the iris indication is in units of 1/3 stop
increments.
State when unit is Functions that can be Assigned to Assignable Buttons 1 to 4
powered on
Setting retained
Assignable Button setting
Not Assigned
Setting retained
SDI Frame Line
SDI Status Info
–
Press & Hold for SDI Log
–
–
–
Monitor Frame Line
–
Setting retained
Monitor Status Info
Press & Hold for Monitor Log
Setting retained
–
Monitor Highlight Clip Ind
–
Monitor High/Low Key
–
Color Bars
AXS Slot Change
SxS Slot Change
Rec Review
VF Frame Line
VF Zebra
Function
No assignment
Turns superimposition of frame lines on the
SDI 3/4 output image on/off.
Turns display of information on the SDI 3/4
output image on/off.
Disables the LUT applied to the SDI 3/4 output
image while the key is pressed, and sets Log
image quality without applying a LUT.
Turns superimposition of frame lines on the
Monitor output image on/off.
Turns display of information on the Monitor
output image on/off.
Disables the LUT applied to the Monitor
output image while the button is pressed, and
sets Log image quality without applying a LUT.
Turns the function that displays clipped
highlight areas in red on the Monitor output
image on/off.
Selects the Monitor output mode.
Switches between High Key (screen for
checking for blown-out highlights)  Low
Key (screen for checking for blocked-out
shadows)  Off (normal display) each time
the button is pressed.
Turns color bars on/off.
Switches the active slot when two AXS
memory cards are inserted.
Switches between A and B each time the
button is pressed.
Switches the active slot when two SxS
memory cards are inserted.
Switches between A and B each time the
button is pressed.
Executes the Rec Review function.
Turns superimposition of frame lines on the
viewfinder output image on/off.
Turns the zebra function of the viewfinder
output image on/off.
State when unit is
powered on
–
Setting retained
Setting retained
Setting not retained
Setting retained
Setting retained
Setting not retained
Setting retained
Setting not retained
Setting retained
–
–
Setting not retained
Setting retained
Setting retained