Sound Settings; Headset Ringer; Anti-Startle (G616) - VTech VH6212 User Manual

Operate

Sound settings

Headset ringer

The headset do not have external ringers. When you receive calls,
the headset earpiece rings.
To change the volume of the earpiece ringer:
• Slide the volume switch at the top of the headset towards VOL+
or VOL- when the headset is not in use.
To turn off the earpiece ringer:
• Slide the volume switch at the top of the headset towards VOL-
until you hear two beeps when the headset is not in use.

Anti-Startle (G616)

G616 Acoustic Limiting provides additional hearing protection
against acoustic shock. By default, this feature is disabled.
When this feature is enabled, the headset limits sound levels at
102 dBA as recommended in the G616: 2006 guideline issued by
the Australian Communications Industry Forum (ACIF).
When this feature is disabled, the headset limits sound levels at
118 dBA to protect your hearing.
To enable the G616 Audio Limiting:
• Press the following headset keys in sequence:
The LED light on the headset will flash purple once and flash
blue twice. You will also hear a confirmation tone.
To disable the G616 Audio Limiting:
• Press the following headset keys in sequence:
The LED light on the headset will flash purple once and flash
red twice. You will also hear a confirmation tone.
, VOL-, VOL+, , VOL-, VOL+,
, VOL-, VOL+, , VOL+, VOL-,
23