Specific Absorption Rates (Sar) For Wireless Phones - Samsung SCH A530 User Manual

Specific Absorption Rates (SAR) for Wireless
Phones
The SAR is a value that corresponds to the relative amount of RF energy
absorbed in the head of a user of a wireless handset.
The SAR value of a phone is the result of an extensive testing, measuring and
calculation process. It does not represent how much RF the phone emits. All
phone models are tested at their highest value in strict laboratory settings. But
when in operation, the SAR of a phone can be substantially less that the level
reported to the FCC. This is because of a variety of factors including its
proximity to a base station antenna, phone design and other factors. What is
important to remember is that each phone meets strict federal guidelines.
Variations in SARs do not represent a variation in safety.
All phones must meet the federal standard, which incorporates a substantial
margin of safety. As stated above, variations in SAR values between different
model phones do not mean variations in safety. SAR values at or below the
federal standard of 1.6 W/kg are considered safe for use by the public.
This wireless portable device has been shown to be capable of compliance for
localized specific absorption rate (SAR) for uncontrolled environment/general
population exposure limits specified in ANSI/IEEE Std. C95.1-1999 and has
been tested in accordance with the measurement procedures specified in
ANSI/IEEE Std. C95.3-1992.
Part 24 CDMA 1900 MHz (PCS Mode) - Head max: 1.44 W/Kg,
Body Max: 1.39 W/Kg
Part 22 CDMA 800 MHz - Head max: 1.47 W/Kg, Body Max: 1.10 W/Kg
99