Table of Contents
Advertisement
– Lock Phone: Choose Lock or Unlock to control lock mode manually, or On
Power Up to have the phone lock automatically when turned on. Follow on-
screen prompts to unlock the phone in Standby mode.
– Change Lock: The default Lock Code is the last four digits of your phone
number. Use Change Lock to reset the Lock Code to a four-digit code of your
choice.
– Emergency #: Enter numbers that can be dialed while in Lock Mode. Default
emergency numbers are provided.
– Reset Phone: Changes all settings except Contacts to the defaults. The
phone will restart automatically after the reset.
– Erase All Entries: Deletes all entries you've made to the phone, including
Contacts.
– Restriction: For Incoming and Outgoing Calls, you can Allow All, Allow
Contacts (to allow only calls to/from numbers stored in Contacts), or Allow
None. For SMS Messages, MMS Messages or Data, you can Allow All or
Allow None.
• NAM Selection — Set your preferred system, NAM1 or NAM2. Contact
your Wireless Provider for more information. Changing this setting
causes your phone to automatically restart.
Important!: If you do the following, you won't be able to access your phone, and
you will be required to call the Service Center to unlock your phone.
– Set Lock Phone to On Power Up
– Change the NAM Selection setting without a number programmed
into NAM2.
• System Select — Select Home Only to restrict your phone to your home
network, or Automatic to allow roaming.
Settings
67
Advertisement
Table of Contents
