Advertisement
Table of Contents
- 1 User Guide
- 2 Before You Begin
- 3 Installation Precautions
- 4 Observe Safety and Regulatory Requirements
- 5 Installing and Removing Memory
- 6 Install SO-Dimms
- 7 Install an M.2 SSD
- 8 Close the Chassis
- 9 Connect Power
- 10 Install an Operating System
- 11 Install the Latest Device Drivers and Software
- Download this manual
Advertisement
Table of Contents
Related Manuals for Intel NUC6i3SYK
Summary of Contents for Intel NUC6i3SYK
-
Page 1: User Guide
Intel NUC Kit NUC6i3SYK & NUC6i5SYK User Guide Intel® NUC Kit NUC6i3SYK Intel® NUC Kit NUC6i5SYK User Guide... -
Page 2: Before You Begin
If such a station is not available, you can provide some ESD protection by wearing an antistatic wrist strap and attaching it to a metal part of the computer chassis. Installation Precautions When you install and test the Intel NUC, observe all warnings and cautions in the installation instructions. To avoid injury, be careful of: ... -
Page 3: Installing And Removing Memory
To open the Intel NUC chassis, follow these steps: 1. Unscrew the four corner screws on the bottom cover of the chassis and lift the cover. Installing and Removing Memory Intel NUC Kits NUC6i3SYK and NUC6i5SYK have two 260-pin DDR4 SO-DIMM sockets. Memory requirements: ... -
Page 4: Install So-Dimms
Intel NUC Kit NUC6i3SYK & NUC6i5SYK User Guide Install SO-DIMMs If you plan to install just one SO-DIMM, install it in the lower memory socket. To install the SO-DIMMs, follow these steps: 1. Observe the precautions in "Before You Begin" on page 2. -
Page 5: Install An M.2 Ssd
Intel NUC Kit NUC6i3SYK & NUC6i5SYK User Guide Install an M.2 SSD Intel NUC Kits NUC6i3SYK and NUC6i5SYK support 80mm and 42mm SSDs. For a list of tested M.2 SSDs, go to the Tested Peripherals page on the Support site. -
Page 6: Close The Chassis
Intel NUC Kit NUC6i3SYK & NUC6i5SYK User Guide Close the Chassis After all components have been installed, close the Intel NUC chassis. Intel recommends this be done by hand with a screwdriver to avoid over-tightening and possibly damaging the screws. - Page 7 Intel NUC Kit NUC6i3SYK & NUC6i5SYK User Guide 2. Attach the two slightly larger black screws to the bottom chassis cover of the Intel NUC. 3. Slide the Intel NUC onto the VESA mount bracket.
-
Page 8: Connect Power
Intel NUC Kit NUC6i3SYK & NUC6i5SYK User Guide Connect Power Country-specific power plug attachments are included in the Intel NUC Kit box. 1. Choose the attachment for your region. Attachments in the box (Product codes) NUC6i5SYK NUC6i5SYKR NUC6i3SYK NUC6i3SYKR US – United UK –... -
Page 9: Install An Operating System
Refer to Supported Operating Systems for a list of Intel-validated Windows* operating systems, as well as versions of Linux that have been reported as compatible by Intel NUC owners. Refer to Operating System Installation for system requirements and installation steps. - Page 10 Intel NUC Kit NUC6i3SYK & NUC6i5SYK User Guide Intel® Software Guard Extensions...