Headrests - Skoda KAROQ Owner's Manual

Folding back into the starting position is accomplished in the reverse order.
Folding back seats
›
If the seat has been removed, first position it on the guide rods and lock it in
place with the seat locks » pav. 93
A
ensure that the seat is locked correctly.
›
Before inserting the middle seat, open the cap for the socket in the ground
opposite the direction of the arrow
›
Fold the seat in the horizontal position until it audibly click in place. Check
that the seat can no longer be lifted by pulling it up.
›
Pull on the loop in the direction of arrow
backrest in direction of arrow
DĖMESIO
The seat backrests in the occupied rear seats must be properly engaged.
ATSARGIAI
Be sure to check the plugs on the bottom of the seats and the plugs under
■
the seats for soiling before inserting or folding the seats forwards - there is a
risk of functions being restricted
Before tilting the centre seat forwards, the cover for the socket in the floor
■
must be opened - there is a risk of damage to the plug on the underside of the
seat.
Plugs and sockets under the seats
On vehicles with seat belt heating or seat heating, there are plugs on the un-
derside of the seats and sockets under the seats.
pav. 94
Folding the seat backrest back
into position
puslapyje 88. Pull the seat upwards to
» pav. 92 puslapyje 88.
2
1 » pav. 94 and fold back the seat
. Check this by pulling on the seat backrest.
2
» puslapis 89.
The plugs and sockets can be soiled with upholstered or removed seats. This
can lead to functions being restricted.
Cleaning
›
Clean the connectors with a cloth moistened with spirits.
›
Carefully remove dirt from the sockets with a vacuum cleaner.
›
Clean the contacts in the sockets with a cloth moistened with spirits.
ATSARGIAI
If the seats are folded up or removed, store them carefully in the luggage com-
partment and do not load the sockets punctiform - there is a risk of damage to
the sockets.

Headrests


Įvadas į temą
Nurodymas
In sports seats, the headrests are integrated into the seat backrests and can-
not be adjusted in height.
Adjust height of front head restraint
›
To adjust the height, hold the locking button
sired direction » pav. 95.
ATSARGIAI
If the tablet holder adapter is secured to the guide rods of the headrests
lapis 105, do not push the headrests down to the stop - risk of damaging the
headrests.
pav. 95
Setting the height of the back
headrest
and move the rest in the de-
A
» pus-
Seats and head restraints
89