Charging - Philips Norelco SW9700 Manual

14
English

Charging

Charging with the power cord
- Charging, recharging, or using the product at
temperatures below 40°F (4.5°C) or higher
than 95°F (35°C) adversely affects lifespan
of the battery.
- Do not charge the shaver in a pouch or
travel case.
- The power plug transforms 100-240V AC to
less than 24V DC.
Charge the shaver before you use it for the first
time and when the display indicates that the
battery is almost empty.
Charging takes approx. 1 hour. A fully charged
shaver has a shaving time of up to 60 minutes.
Note: You cannot use the shaver while it is
charging.
1
Make sure the shaver is switched off.
2 Put the small plug in the shaver and connect
the power plug to any 100V to 240V AC
outlet. Use only the power cord provided.
The display of the shaver indicates that the
shaver is charging.
3 After charging, remove the power plug from
the wall outlet and pull the small plug out
of the shaver.
Note: An adapter plug may be necessary for
cord usage in some foreign countries. Use
an attachment plug adapter of the proper
configuration for power outlet.