Advanced Settings; Changing The Settings; Operating The Initial Setup Screen - Pioneer HTZ-BD52 Operating Instructions Manual

76

Advanced settings

En
Chapter 8
Advanced settings

Changing the settings

Note
The items that can be selected depend on the player's status.
In Options, the factory default settings are indicated in bold.
Setting
TV Screen
Video Adjust
Sharpness
8
Video Mode
Noise Reduction
Net Contents Mode
Options Explanation
16:9 Full Select this when connecting to a wide (16:9) TV.
16:9 Normal Select this when connected to a wide (16:9) TV. 4:3 pictures are displayed
with vertical black bars along the sides.
4:3 Pan&Scan Select this when connecting to a 4:3 screen TV and playing a 16:9 video. The
video will be played with the left and right sides of the image cut off to display
on the 4:3 screen. (This function works if the disc is labeled for 4:3PS.)
4:3 Letterbox Select this when connecting to a 4:3 screen TV and playing a 16:9 video. The
video will be played with black bands at the top and bottom.
The quality of the playback picture can be adjusted according to the TV you are using (page 80).
High Choose the level of sharpness.
Middle
Low
Standard Choose the video output mode.
Vivid
Cinema
Custom
0 Choose the level of noise reduction.
1
2
3
Off Select this to automatically correct compressed video files on the network, a
disc or a USB device and play them with a more natural picture quality.
On
Operating the initial setup
screen
1. When playback is stopped, display the
Home Menu screen.
Press HOME MENU.
2. Select and set Initial Setup.
Use / to select, then press ENTER.
3. Select the item and change the setting.
Use / / / to select, then press ENTER.
Closing the Initial Setup screen
Press HOME MENU or RETURN.