Wall Mounting The Speaker For Bcs-727 - Pioneer HTZ-BD52 Operating Instructions Manual

4 Insert the upper cabinet to the lower
cabinet.
5 Fix the upper cabinet and the lower
cabinet from the backside of the speaker
using the two screws (M4 x 12).
Caution
Be careful not to tighten screws excessively.
If excessive force is used to tighten screws, the
threads of screw and/or nut may be damaged.
Use a middle-sized manual screwdriver during
assembly. Do not use power screwdrivers or
oversized screwdrivers that may exert excessive
force on the screws and nuts. Confirm that no
foreign matter is stuck to the base or the lower
cabinet during assembly. If the unit is assembled
with foreign matter stuck between the base and
lower cabinet, the unit may not be assembled
securely, resulting in tipping or falling.
Do not stand on the speaker stand base of the tall
speaker to push or swing the speaker. The speaker
may fall and break, or someone may be injured.
Pay special attention to children.
Wall mounting the speaker for
BCS-727
The center speaker have a mounting hole
which can be used to mount the speaker on
the wall.
Before mounting
Remember that the speaker system is heavy
and that its weight could cause the screws
to work loose, or the wall material to fail to
support it, resulting in the speaker falling.
Make sure that the wall you intend to mount
the speakers on is strong enough to support
them. Do not mount on plywood or soft surface
walls.
Mounting screws are not supplied. Use screws
suitable for the wall material and support the
weight of the speaker.
Caution
If you are unsure of the qualities and strength of
the wall, consult a professional for advice.
Pioneer is not responsible for any accidents or
damage that result from improper installation.
5 mm
10 mm
Mounting screw
(not supplied)
5 mm to 7 mm
Connecting 23
En
2