Android Development - Samsung Behold II SGH-t939 User Manual

Timer
You can use this menu to set a timer. To enable the Timer, use the following options:
From the Home screen, open the Widget bar and touch the Timer widget.
1.
Scroll or touch the + or - buttons to enter the Hour, Minute, and Second.
2.
Touch the Ringtone field, touch the circle to the right of the alarm tone desired and touch Select.
3.
Touch Start to start the timer.
4.
Touch Stop to stop the timer or Reset to reset the time and start over.
5.
Stopwatch
This feature allows you to use a stopwatch. Touch start to begin the stopwatch counter. Touch Lap to begin the lap
time counter. Touch Stop to stop the counter. Touch Reset to restart the lap counter. You can use multiple lap times.
From the Home screen, open the Widget bar and touch the Stopwatch widget.
1.
Touch Restart to restart the stopwatch.
2.
Memory Status
This menu item shows the number of calendar events that are stored on the handset as well as the total number of
available events. Example: 2/300 means that currently there are two alarm events scheduled out of a possible 300.
From the Home screen, touch Quick List

Android Development

This device can be used for Android application development. You can write applications in the SDK and install
them on this device, then run the applications using the hardware, system, and network.
Warning!: Android Dev Phone 1 devices are not intended for non-developer end-users. Because the device can be configured with
system software not provided by or supported by Google or any other company, end-users operate these devices at their
own risk.
➔ ➔
Settings Memory settings
➔
Memory status.
Applications and Development 158