Camera Module - Samsung Behold II SGH-t939 User Manual

Configuring Camera Options
In Capture mode (prior to taking a new photo), touch one of the on-screen icons to use various options for the
1.

camera module.

The following options are available:
• Camera/Video: allows you to take a picture or record a video.
• Mode: takes a photo in various modes. Once you change the mode, the corresponding indicator displays at
the top left of the display.
– Single: takes a single photo and allows you to view it before returning to the shooting mode.
– Continuous: takes a succession of photos.
– Mosaic: Takes up to four photos and then groups them together into a single final photo.
– Panorama: takes a landscape photo and places a black mat in front of the photo so it looks like there are four panels in one photo.
– Smile shot: the camera focuses on the foreground or subject and not on the background.
• Timer: allows you to set a time delay before the camera takes the photo. Select the length of delay you want and touch the Off,
2 Seconds, 5 Seconds, and 10 Seconds. When you press the Camera key, the camera takes the photo after the specified time
elapses.
• Setup: allows you to configure the following:
– Scene Mode: allows you to set the camera options to capture scenes such as None, Portrait, Landscape, Sports, Party Indoor,
Beach Snow, SunSet, Dawn, Fall, Night, Fire, Text, Candle, Backlight.
– Resolutions: allows you to set the image size to either: 2560x1920(5M), 2048x1536(3M), 1600x1200(2M), 640x480(0.3M), 320x240.
– White balance: allows you to set this option from the following choices: Auto, Cloudy, Daylight, Fluorescent, or Incandescent.
– Effects: allows you to change the color tone or apply special effects to the photo. Options include: Normal, BW (black & white), Sepia,
Violet, Green, Aqua, Negative, Emboss, Outline, or WaterColor.
– Focus Mode: allows you to focus on the center of the viewfinder. Modes are Auto Focus, Macro, or Face Detection.
– ISO: allows you to adjust the ISO sensitivity of the camera imaging sensor. Selections are: ISO Auto, ISO 50, ISO 100, ISO 200, ISO 400, or
ISO 800 speed.
– Image quality: allows you to set the image quality to: Superfine, Fine, or Normal.
– Metering: allows you to set how the camera measures or meters the light source: Center, Spot, or Matrixt.
– Anti-Shake: allows you to touch On to activate Anti-Shake, or Off to deactivate it.
– WDR: allows you to set the Wide Dynamic Range. Touch On to activate WDR, or Off to deactivate it.
– Adjust: allows you to use the slider bar to adjust the Contrast, Saturation, or Sharpness.
101