Disassembly & Reassembly - Samsung 191T Serivce Manual

3 Disassembly and Reassembly
This section of the service manual describes the disassembly and reassembly procedures for the
GH19B* monitors.
WARNING: This monitor contains electrostatically sensitive devices. Use caution when handling
these components.
3-1 Disassembly
Cautions:1. Disconnect the monitor from the power source before disassembly.
2. Follow these directions carefully; never use metal instruments to pry apart the cabinet.
GH19B*
1. Put the jig into the left openning hole and lift
up the panel until the snap of the Cover Rear
opens.
2. Put the jig into the right opening hole and lift
up the panel until the snap of the Cover Rear
opens.
3. Put the jig into the gap (between the right side
of the panel the and Front Cover) and tilt up
Front Cover until the snap opens.
CONFIDENTIAL
3-1