Information On The Identification Plate; Serial Number; Ce Label; Benchmark - Vaillant ecoFIT sustain 618 Operating Instructions Manual

3 Product description
Symbol Meaning
Summer mode active
Heating mode is
switched off
Burner anti-cycling time
is active
Fault in the product
F.XX
3.4

Information on the identification plate

The identification plate is mounted on the underside of the
product in the factory.
The identification plate keeps record of the country in which
the product is to be installed.
Information on the Meaning
identification plate
Barcode with serial number

Serial number

For quality control purposes; 3rd and 4th
digits = year of production
For quality control purposes; 5th and 6th
digits = week of production
For identification purposes; 7th to 16th
digits = product article number
For quality control purposes; 17th to 20th
digits = place of manufacture
ecoFIT pure Product designation
2H, G20 – 2 kPa (20
Factory setting for type of gas and gas
mbar) connection pressure
Cat. Unit category
Condensing techno- Efficiency class of the boiler in accord-
logy ance with EC Directive 92/42/EEC
Type: Xx3(x) Permissible flue gas connections
PMS Maximum water pressure in heating
mode
PMW Maximum water pressure in hot water
handling mode
V/Hz Electrical connection
W Max. electrical power consumption
IP Level of protection
Heating mode
Hot water generation
Pn Nominal heat output range in heating
mode
Pnc Nominal heat output range in heating
mode (condensing technology)
P Nominal heat output range in hot water
handling mode
Qn Nominal heating load range in heating
mode
Qnw Nominal heating load range in hot water
handling mode
T Max. flow temperature
max.
NOx NOx class for the product
Code (DSN) Specific product code
6
Explanation
To avoid the need for
frequent switching on
and off (increases the
3.5
product's working life).
Fault in the product.
The serial number is located on a plastic plate at the bottom
Appears instead of the
of the front casing.
basic display.
3.6
The CE label shows that the products comply with the basic
requirements of the applicable directives as stated on the
identification plate.
The declaration of conformity can be viewed at the manufac-
turer's site.
3.7
Vaillant is a licensed member of the Benchmark Scheme
which aims to improve the standards of installation and com-
missioning of domestic heating and hot water systems in the
UK and to encourage regular servicing to optimise safety, ef-
ficiency and performance.
Benchmark is managed and promoted by the Heating
and Hotwater Industry Council. For more information visit
www.benchmark.org.uk.
▶
All installations must be notified to Local Area Building Con-
trol either directly or through a Competent Persons Scheme.
A Building Regulations Compliance Certificate will then be
issued to the customer who should, on receipt, write the No-
tification Number on the Benchmark Checklist.
This product should be serviced regularly to optimise its
safety, efficiency and performance. The service engineer
should complete the relevant Service Record on the Bench-
mark Checklist after each service.
The Benchmark Checklist will be required in the event of any
warranty.
Information on the Meaning
identification plate
Read the instructions.
GC no. Gas council number
Serial number

CE label

Benchmark

Please ensure that the installer has fully completed the
Benchmark Checklist on the inside back pages of the
installation instructions supplied with the product and
that you have signed it to say that you have received a
full and clear explanation of its operation. The installer is
legally required to complete a commissioning checklist
as a means of complying with the appropriate Building
Regulations (England and Wales).
Operating instructions ecoFIT sustain 0020277253_00