Step 2: Routing Stage Box Inputs To Your Mixer; Step 3: Engage Network Sources - PRESONUS StudioLive 24R Networking Manual

4 Configuring Your AVB Network
4.3 NSB-series Stage Box UC Surface Setup

Step 2: Routing Stage Box Inputs to Your Mixer

4.3.2
4.3.3

Step 3: Engage Network Sources

1. Click on the AVB Inputs tab.
2. Next to desired inputs on your mixer, select the NSB AVB Send stream you
would like to use from the Available Stream drop-down menu. This will patch
the selected inputs on your NSB stage box to these channels on your mixer.
Note: NSB stage boxes have two sets of streams: one with Gain Compensation and
one without. Please review your NSB-series Owners Manual for more information
on Gain Compensation and when it is advantageous or even required.
1. Click or tap on the Digital Patching tab.
2. By default, the Input Source tab will be active. Select
AVB from the Source Type selection.
3. Click or tap on the source icon for channels on your StudioLive mixer
to change each channel's source input to AVB. This will enable the
corresponding NSB stage box input to each channel. In the example
below, NSB Input 1 will be enabled on StudioLive 24R channel 25,
NSB Input 2 will be enabled on StudioLive 24R channel 26, etc.
Your NSB stage box is now ready to use!
StudioLive™ Series III
AVB Networking Guide
30