Hybrid Graphics (Select Models Only); Using Hybrid Graphics (Select Models Only) - HP ZBook 14 User Manual

To test the AC adapter:
1. Shut down the computer.
2. Remove the service door (see
3. Remove the battery from the computer (see
4. Connect the AC adapter to the computer, and then plug it into an AC outlet.
5. Turn on the computer.
●
If the power lights turn on, the AC adapter is functioning properly.
●
If the power lights remain off, the AC adapter is not functioning and should be replaced.
Contact support for information on obtaining a replacement AC power adapter.

Hybrid Graphics (select models only)

Select computers are equipped with the Hybrid Graphics feature.
NOTE: To determine if Hybrid Graphics is installed on your computer, see your notebook graphics
processor configuration and software Help.
Hybrid Graphics offers two modes for processing graphics:
●
High Performance mode—Applications assigned to this mode run on the higher-performance
graphics processing unit (GPU) for optimal performance.
●
Power Saving mode—Applications assigned to this mode run on the lower-performance GPU to
conserve battery power.

Using Hybrid Graphics (select models only)

The Hybrid Graphics feature allows an application to run in either High Performance mode or Power
Saving mode, based on the application's graphics-processing demands. Typically, 3D and gaming
applications run on the higher-performance GPU, and applications with lightweight graphics-
processing demands run on the lower-performance GPU. You can change the mode an application
uses (High Performance or Power Saving) through the Hybrid Graphics control panel.
NOTE: Due to hardware limitations, some applications can be run in only one of the two modes.
For more information, see your Hybrid Graphics software Help.
Removing the service door on page
Removing a battery on page
41).
34).
Hybrid Graphics (select models only) 39