usi n g wi t h Wi n dows computer
SYSTEM REQUIREMENTS
The following requirements must be satisfied to use CyberLink MediaShow4.
CPU
Intel
Windows Vista or XP (Windows XP Service Pack 2 or higher)
OS
• Standard installation is recommended. Operation may not assured if the above OS has been
(Operating System)
RAM
512MB (1 GB and above recommended)
800 x 600, 16-bit colour or higher
Resolution
USB
USB2.0 High Speed
Intel
NVIDIA Geforce 6600 or higher
VGA
ATI Radeon X1600 or higher
• On a low performance graphics system, running the MediaShow4 may cause error or not apply some
Internet Explorer 5.5 or later DirectX 9.0 or later
Miscellaneous
DVD+R/+RW, DVD-R/-RW
Supported media
For the compatible DVD/CD burners, refer to CyberLink web site:
http://www.gocyberlink.com/english/products/powerproducer/2_gold/comp_dvd_drives.jsp
•
System requirements mentioned above are recommendations. Even on a system that satisfies the requirements operation is
not ensured depending on the system.
•
On a slower computer than recommended, video playback may skip frames or operate unexpectedly.
•
If your OS is Windows XP/Vista, log in as the Administrator (administrator of the computer) (or a user with the equivalent
privileges) to install the software.
•
Check out the storage media of the camcorder before connecting USB cable.
•
All other brands and names are property of their respective owners.
•
CyberLink MediaShow4 is optimised for Intel Core 2 Duo processors and CPUs with MMX, SSE, 3DNow!, and Intel
HyperThreading technology.
•
DirectX is necessary so that CyberLink MediaShow4 works properly and it is automatically installed during CyberLink
MediaShow4 installation.
•
CyberLink MediaShow4 is available for Windows only.
•
This camcorder can be used only as a removable storage device for the computers with Macintosh (OS version 10.3 or
later) and Windows 2000.
108_ English
Pentium
4, at least 3.0 GHz/AMD recommended
®
®
upgraded.
945GM or faster
®
of animation effects.
(VP-DX205(i ) /DX2050/DX210(i ) onl y )
(
)