Self Record Using The Remote Control (Vp-D353(I)/D354(I)/D355(I) Only) - Samsung VP D 352 i User Manual

ENGLISH
Basic Recording
Self Record using the Remote Control
(VP-D353(i)/D354(i)/D355(i) only)
✤
The SELF TIMER function works only in Camera mode.
✤
When you use the Self Timer function on the remote control, the recording
begins automatically in 10 seconds.
1. Set the Power switch to CAMERA.
2. Set the Mode switch to TAPE.
3. Press the SELF TIMER button until the appropriate indicator
is displayed in the LCD screen.
4. Press the Start/Stop button to start the timer.
- Self Timer starts counting down from 10 with a beep
sound.
- In the last one second of the countdown, the beep sound
gets faster, then recording starts automatically.
- If you want to cancel the Self Timer function before
recording, press the SELF TIMER button.
5. Press the Start/Stop button again when you wish to stop
recording.
[ Notes ]
Do not obstruct the remote control sensor by putting
I
obstacles between the remote control and Camcorder.
The remote control range is 4 ~5m (13 ~17 ft).
I
The effective remote control angle is up to 30 degrees left
I
/right from the centre line.
Using a tripod is recommended for delayed recording.
I
✤
✤
1
3
œ
4
I
œ
I
I
I
°
43 43