Connecting A Power Source; To Use The Ac Power Adapter And Dc Cable; To Select The Camcorder Mode (Vp-D353(I)/D354(I)/D355(I) Only) - Samsung VP D 352 i User Manual

ENGLISH
Preparation

Connecting a Power Source

There are two types of power source that can be connected to your
Camcorder.
- The AC Power adapter and AC Cord: used for indoor recording.
- The Battery pack: used for outdoor recording.

To use the AC Power Adapter and DC Cable

1. Connect the AC Power adapter to the
AC Cord.
2. Connect the AC Cord to a wall socket.
[ Notes ]
You must use an AA-E8 TYPE AC
I
Power adapter.
The plug and wall socket type may differ
I
according to your resident country.
3. Connect the DC cable to the DC jack
socket of the Camcorder.
4. Set the Camcorder to each mode by
holding down the tab on the Power
switch and turning it to the CAMERA or
PLAYER mode.

To Select the Camcorder Mode (VP-D353(i)/D354(i)/D355(i) only)

✤ If you want to use this unit as a Camcorder,
set the Mode switch to TAPE.
✤ If you want to use this unit as a DSC (Digital Still
Camera), Set the Mode switch to MEMORY CARD.
20 20
Power Switch
<CAMERA mode> <PLAYER mode>
I
I
✤
✤