Setting Up The Monitor; Use Caution When Setting Up The Monitor; Attaching The Monitor Stand - HP Z43 User Manual

Component
13 USB Type-C port
(upstream)*
*The USB Type-C port (upstream) can function as a DisplayPort audio/video input, as a USB 3.0 upstream connection,
or it can be used to deliver up to 65 watts of power to a device. Power outputs are 5 V/9 V/10 V/12 V/15 V/20 V to
achieve 65 W output.

Setting up the monitor

Use caution when setting up the monitor

To prevent damage to the monitor, do not touch the surface of the LCD panel. Pressure on the panel may
cause nonuniformity of color or disorientation of the liquid crystals. If this occurs the screen will not recover
to its normal condition.
If installing a stand, position the monitor facedown on a flat surface covered with protective sheet foam or a
nonabrasive cloth. This prevents the screen from getting scratched, defaced, or broken and prevents damage
to the control buttons.

Attaching the monitor stand

CAUTION:
damage.
TIP: Consider the placement of the monitor, because the bezel might cause interfering reflections from
surrounding light and bright surfaces.
1. Lift the monitor from its box and place it facedown on a flat surface covered by protective sheet foam or
a nonabrasive cloth.
2. Slide the hinge cover on the neck of the stand onto the hinge on the back of the monitor, and press until
it clicks into place.
4 Chapter 1 Getting Started
Function
Connects a USB Type-C cable to a source device.
The screen is fragile. Avoid touching or applying pressure to the screen; doing so can cause