using with a Windows computer
USING THE INTELLI-STUDIO PROGRAMME
Using the built-in Intelli-studio programme in your camcorder, you can transfer video/photo fi les onto your PC and edit them
on your computer. The Intelli-studio offers the most convenient way for you to manage video/photo fi les by using the simple
USB cable connection between the camcorder and your PC.
Starting the Intelli-studio programme
Step1.ConnectingtheUSBcable
1. Set the menusettingto "PCSoftware:On".➥
• You will fi nd the default menu settings are set as shown at right.
2. Connect the camcorder and the PC with the USB cable.
• A new fi le saving screen appears with the Intelli-studio main window.
• According to your computer type, the corresponding removable disk window appears.
3. Click "Yes", the uploading procedure will start. Click "Yes" to confi rm.
• If you do not want to save a new fi le, select"No."
DisconnectingtheUSBcable
After completing the data transfer, make sure to disconnect the cable in the following way:
1. Click on the "Safely Remove Hardware icon"icon on the taskbar.
2. Select "USB Mass Storage Device", and then click "Stop".
3. If the "Stop a Hardware device" window appears, click "OK."
4. Disconnect the USB cable from the camcorder and PC.
Use the provided USB cable. (Supplied by Samsung)
•
Don't apply excessive force when inserting or extracting the USB cable into/from a USB jack.
•
Insert the USB after checking the correct direction of its insertion.
•
We recommend using the AC power adaptor as power supply instead of the battery pack.
•
When the USB cable is connected, turning the camcorder on or off may cause the PC to malfunction.
•
If you disconnect the USB cable from the PC or the camcorder while transferring data, the data transfer will stop
•
and the data may be damaged.
If you connect the USB cable to a PC via a USB HUB or simultaneously connect the USB cable along with other
•
USB devices, the camcorder may not work properly. If this occurs, remove all USB devices from the PC and
reconnect the camcorder.
According to your computer type, the Intelli-studio programme may not run automatically. In this case, open the
•
desired CD-ROM drive that has the Intelli-studio programme in My Computer and run iStudio.exe.
When a USB cable is connected, if you have EmoDio (Samsung's MP3 player software) installed on your computer,
•
the EmoDio software may load fi rst.
102_English
page 93
STBY
0:00:00 [475Min]
Settings
Off
PC Software
:
On
TV Display
:
Default Set
Exit
Move
Select