Lens Selection - Samsung SHC-730N/P Instruction Manual

High sensitivity color camera
Table of Contents

Advertisement

Operating Your Camera
· When completed, press END button.
Notes
Tips on Using the Motion Detection Feature
• After selecting zone and sensitivity, perform a test operation to make sure it
works properly.
• If the lighting flickers, the motion detection feature might not work properly.
• The object should occupy 10% or more of its zone. The bigger the object, the
higher sensitivity.
• If the brightness of an object changes rapidly by sudden lighting change, the
camera may detect it as a motion.
• When this feature is activated, another algorithm may take more time to be operated.
• This system does not guarantee prevention of fires or thefts. The manufacturer
is not responsible for any accident or damage.
• You can use the MD output terminal jack on the rear of the camera to connect
an external alarm device. For details, see page 40.

Lens Selection

You can set the type of the lens, and control the brightness of the screen.
1. Press the SET button to display the setup menu and move the arrow
indicator to 'Lens' using the UP or DOWN button.
2. Set 'Lens' to the desired mode using LEFT or RIGHT button.
• You can select from DC / Video, Manual
COLOR CCD CAMERA
30
User's Manual
DC / Video: When using auto iris lens
SETUP
CAMERA ID
BACKLIGHT
WHITE BAL.
MOTION DET.
LENS
SHUTTER
When using Auto Iris Lens with Video type
Adjust ALC volume on the lens properly. Normally ALC volume should be
turned all the way to Av(Average).
According to the type of the lens used, the lens may not perform properly.
In such a case, adjust the volume level on the lens.
For using VIDEO LENS, at first, execute IRIS ADJ(Press 'SET' button locating
the cursor on 'IRIS ADJ'). If operation fails, 'Err Can't Close : Turn down' or
'Iris Test Err Flicker' message is displayed. Then you should adjust volume
level. Until 'Lens Level Adjustment OK' message is displayed, adjust volume
level repeatly.
Notes
• When trying to execute IRIS ADJ, do it under as below conditions.
- shoot a white paper or bright wall.
- shoot light resource or bright area. (more than 150lux)
COLOR CCD CAMERA
31
OFF
WDR
ATW
OFF
DC
ESC
User's Manual

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Shc-730nShc-730p

Table of Contents