Usb Interface (Sc-D352/D353/D354/D355 Only); Usb ( Sc-D352/D353/D354/D355 ) - Samsung SC-D353 Owner's Instruction Book

ENGLISH
USB Interface
(SC-D352/D353/D354/D355 only)
Transferring a Digital Image through a USB Connection
✤ The camcorder supports both USB 1.1 and 2.0 standards.
(Depends on the PC specification)
✤ You can easily transfer a image from a Memory card to a PC without
additional add-on cards via a USB connection.
✤ You can transfer a recorded file in memory card to a PC via a USB
connection. (SC-D353/D354/D355 only)
✤ If you transfer data to a PC, you need to install the software (DV Driver,
Video Codec, DirectX 9.0) supplied with the Camcorder.
USB Connection speed depending on the System
High speed USB connection is supported by Microsoft (Windows) device drivers only.
I
Windows 98SE/ME - Full Speed USB
I
Windows 2000 - High speed USB on a system with Service Pack 4 or later installed.
I
Windows XP - High speed USB on a system with Service Pack 1 or later installed.
System Requirements
Minimum
CPU Intel ® Pentium III™, 600MHz
OS (operating system) Windows ® 98SE/ME
Memory 128MB
HDD capacity 1GB or more
Resolution 1024 x 768 dots
24bit Color
USB USB 1.1
I
It is not available for Macintosh systems.
[ Notes ]
I
USB 2.0 works only for removable disk functions.
I
On a slower PC than recommended, movie playback may not be smooth or video
editing may take a long time.
I
On a slower PC than recommended, movie playback may skip frames or operate
unexpectedly.
I
Intel ® Pentium III™ or Pentium 4™ is a trademark of the Intel Corporation.
I
Windows ® is a registered trademark of the Microsoft
I
All other brands and names are property of their respective owners.
I
Operations are not guaranteed for all of the recommended computer environments
mentioned above.
I
Do not connect the Camcorder to a PC using both DV and USB cables. It may not
operate properly.
I
In M.Cam or M.Player mode, be sure that the Memory card is inserted into
Camcorder before connecting USB cable. If no Memory card or an unformatted
Memory card is inserted, PC will not recognize your Camcorder as a removable
disk. (SC-D353/D354/D355 only)
I
USB Streaming requires Video Codec, DV Driver and DirectX 9.0.
I
If you disconnect the USB cable from the PC or the Camcorder during the data
transfer, the data transfer will stop and the data may be damaged.
I
If you connect the USB cable to a PC using a USB HUB or with other devices at
the same time, it may cause conflict and may not work properly. If this occurs,
remove all other USB devices and try the connection again.
Windows System
Recommended
Intel ® Pentium 4™ , 2GHz
Windows ® 2000/XP
512MB
2GB or more
1024 x 768 dots
24bit Color
USB 2.0 High Speed
® Corporation.
USB
( SC-D352/D353/D354/D355)
USB
✤
USB 1.1
✤
,
USB
✤
,
USB
( SC-D353/D354/D355 )
✤
USB ,
( )
USB
USB Microsoft(windows)
I
Windows 98SE/ME-
I
Windows 2000-Service Pack4
I
Windows XP-Service Pack1
CPU Intel ® Pentium III™, 600MHz
Windows ® 98SE/ME
128MB
USB USB 1.1
I
Macintosh
I
USB2.0
I
,
I
,
I
Intel Pentium II TM Pentium 4 TM
®
I
Windows Micorsoft
® ®
I
I
,
I
IEEE 1394
I
M.Cam ( ) M.Player (
( SC-D353/D354/D355 )
I
USB Video Codec, DV
I
I
USB HUB
,
(
USB2.0
USB , DirectX 9.0
Intel ® Pentium 4™ , 2GHz
Windows ® 2000/XP
512MB
,
Intel
,
USB
) ,
USB
,
DirectX9.0
USB ,
,
,
USB
)
,
81 81