Table of Contents
Advertisement
1 If an error has occurred (a red light flashes), check for the following
causes:
Error description
No paper cassette has been
loaded.
The paper cassette has been
loaded facing in the wrong
direction.
There is no more paper.
A paper misfeed occurred.
A transmission error occurred.
An overheat error occurred.
2 If a system error has occurred (indicated by the lit red light) ...
The printer may be damaged. Contact your Brother dealer or
Brother Customer Support. ( See the Product Safety Guide.)
Correctly install a paper cassette
containing paper ( see page 14).
Remove the paper cassette once, or turn
off and on the printer to clear the error.
Remove the misfed paper
( see page 22).
If you do not remove the misfed paper
after turning off and on the printer, the
error persists.
Clean the paper feed roller and remove
paper powder ( see page 21).
Check the transmission status
( see page 17).
Wait for a few seconds. If the printer has
recovered from the error, resend the data
to resume printing.
If the printer does not recover during a
Bluetooth connection, re-establish the
connection.
The inside of the printer has started to
overheat.
Wait until it cools down.
If an overheat error has occurred during
the printing process, the paper being
printed is fed and discharged.
Remedy
9
Advertisement
Table of Contents
