Page 1
Digital Camcorder SC-X105(L)/X110(L) Auto Focus Charge Coupled Device Liquid Crystal Display Owner’s Instruction Book Before operating the unit, please read this Instruction Book thoroughly, and retain it for future reference. US PATENT 4415844 ENGLISH ELECTRONICS...
ENGLISH Notices and Safety Instructions Safety Instructions Shock Hazard Marking and Associated Graphical Symbols CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN Explanation of Safety Related Symbols CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK).
Page 3
16. VENTILATION: Slots and openings in the cabinet are provided for ventilation to ensure reliable operation of the CAMCORDER and to protect it from overheating. These openings must not be blocked or covered. Never place your CAMCORDER on a bed, sofa, rug, or other similar surface: on or near a radiator or heat register.
Page 4
CAMCORDER to its normal operation. e. If the CAMCORDER has been dropped or the cabinet has been damaged. f. When the CAMCORDER exhibits a distinct change in performance, this indicates a need for service.
Page 5
DISPOSED OF ACCORDING TO LOCAL, STATE OR FEDERAL LAWS. For details see lamprecycle.org, eiae.org, or call 1-800-Samsung NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
ENGLISH Contents Notices and Safety Precautions Precautions on the CAM Care ...8 Notes Regarding COPYRIGHT...9 Notes Regarding Moisture Condensation...9 Notes Regarding the CAM...9 Notes Regarding the Battery Pack...10 Notes Regarding a Trademark...10 Notes Regarding the Lens...11 Notes Regarding the LCD Display ...11 Precautions Regarding Service...11 Precautions Regarding Replacement Parts...11 Getting to Know Your CAM...
Page 7
Contents Getting Started The Color of the LED ...25 Using Hardware Reset Function ...25 Before You Start Operating the CAM...26 Using the Function Button...27 Using the Display Button ...28 Adjusting the LCD Monitor ...29 Structure of the Folders and Files ...30 Recording Time and Capacity ...31 Selecting the Memory Type...33 Using the Memory Stick (Optional Accessory) ...34...
Page 8
ENGLISH Contents Setting the Program AE (Programmed Auto Exposure) ...51 Setting the BLC (Backlight Compensation)...52 Setting the Effect...53 Setting the Digital Zoom ...54 Photo Mode Capturing...56 Capturing Images...56 Zooming In and Out ...57 Viewing ...58 Viewing Photo files on the LCD Monitor...58 Selecting File Options ...59 Deleting Photo files ...59 Locking Photo files...60...
Page 9
Contents Selecting Play Options ...74 Setting Repeat Play ...74 Selecting File Options ...75 Deleting Music files ...75 Locking Music files...76 Copying Music files ...77 Voice Recorder Mode Recording...78 Recording Voice...78 Playing ...79 Playing Voice files ...79 Selecting File Options ...80 Deleting Voice files...80 Locking Voice files ...81 Copying Voice files...82...
Page 10
ENGLISH Contents Setting the System...94 Setting the Auto Shut off...94 Setting the Demo Function ...95 Setting Start-up Mode...96 Setting the File No. Function ...97 Setting the Beep Sound...98 Viewing Version Information ...99 Setting Memory ...100 Selecting the Storage Type ...100 Formatting the Memory...101 Viewing Memory Space ...102 Using USB Mode ...103...
Page 11
Contents Copying Video files to a VCR Tape ...114 Recording unscramble contents from other digital devices ...115 Connecting the CAM to a PC using the USB cable...116 Installing Programs ...117 Installing Image Mixer ...117 Installing software for using PC-Cam ...119 Installing Windows98SE Driver(For Windows98SE only)...120 Printing Photos...122 Printing with PictBridge Function...122...
Particular care should be observed if photographing infants, when the flash should be no less than 3 feet from your subject. If the device is not working properly, please consult your nearest dealer or authorized Samsung service facility. Disassembling the device yourself may cause irrecoverable damage which will be difficult to repair.
✤ All the trade names and registered trademarks mentioned in this manual or other documentation provided with your Samsung product are trademarks or registered trademarks of their respective holders. Notes Regarding Moisture Condensation 1. A sudden rise in atmospheric temperature may cause condensation to form inside the CAM.
ENGLISH Notices and Safety Precautions Notes Regarding the Battery Pack ✤ It is recommended to use original battery pack that is available at SAMSUNG service center. ✤ Make sure the battery pack is fully charged before starting to record. ✤...
Notices and Safety Precautions Note Regarding the Lens ✤ Do not film with the camera lens pointing directly at the sun. Direct sunlight can damage the CCD (Charge Coupled Device, the imaging sensor). Notes Regarding the LCD Display 1. The LCD monitor has been manufactured using the high precision technology. However, there may be tiny dots (red, blue or green in color) that appear on the LCD monitor.
ENGLISH Getting to Know Your CAM Features Integrated Digital CAM/DSC operation ● An integrated digital imaging device that easily converts between a Digital CAM and a Digital Still Camera with comfortable and easy recording. High Resolution Image Quality (Digital Still Camera) ●...
Getting to Know Your CAM Accessories Supplied with the CAM ✤ Make sure that the following basic accessories are supplied with your CAM. Lithium Polymer Battery pack AC Power Adapter Audio/Video Cable USB Cable Cradle Earphones Hand Strap Carrying Case Instruction Book/Quick Guide Software CD Lens Cover...
Location of Controls Right & Bottom View 1. Lens 2. Light 3. Earphones and AV Input/Output Jack 4. Battery insertion part 5. Battery eject button Lens Light Earphones and AV Input/Output Jack Battery insertion part Battery eject button Hanging Lens Cover on the CAM 6.
ENGLISH Location of Controls External Camera Module View (SC-X105L/X110L only) 1. Power button 2. Power LED 3. Lens 4. MIC Power button Power LED Lens Tripod Receptacle Battery Cover 7. BATT.OPEN Switch 5. Tripod Receptacle 6. Battery Cover 8. Record Start/Stop button 10.
Location of Controls: LCD Display OSD (On Screen Display in Video Record Mode / Video Play Mode) Video Record Mode Video Record SF / 720 00:16 / 24:32 STBY Sepia Mode indicator EIS indicator Program AE indicator White Balance indicator BLC indicator Focus indicator Counter...
Location of Controls: LCD Display OSD (On Screen Display in MP3 Play Mode / Voice Record / Play Mode) MP3 Play Mode MP3 Play 2. I believe I can fly.mp3 3.6 Mbytes Stereo 44.1KHz 128Kbps 00:34 / 03:46 Mode indicator File number/ File name/File format File size Sampling Rate/Bit Rate...
ENGLISH How to Use the Battery Pack Battery (Pack) Installation / Ejection It is recommended you purchase one or more additional battery packs to allow continuous use of your CAM. To insert the battery pack Slide the battery pack into the groove until it clicks. To eject the battery pack Pull the [Battery Eject] button to eject the battery pack.
Do not allow the + and - terminals of the battery pack to be short-circuited. It may cause leakage, heat generation, induce fire and overheating. ✤ It is recommended to use original battery pack that is available at SAMSUNG service center. ENGLISH...
Page 26
Notes ✤ Prepare an extra battery if you use the CAM outdoors. ✤ Contact a Samsung retailer to purchase a new battery pack. ✤ If you zoom in or out, the recording time becomes shorter. ✤ ‘Continuous Recording Time’ indicates the time that you neither use zooming function...
Page 27
How to Use the Battery Pack Battery Level Display The Battery Level Display shows the amount of battery power remaining in the Battery Pack. Battery Level Indicator Exhausted(flickers) The device will soon turn off. Change the Battery Pack as soon as possible. The device will be forced to turn off after 5 seconds.
ENGLISH How to Use the Battery Pack Charging the Battery Pack Slide [Mode Selector] up to turn the CAM off. Attach the Battery Pack to the CAM. Fix the CAM into the cradle. Connect the AC power adapter to the DC In jack on the cradle. ◆...
Getting Started The Color of the LED The color of the LED varies depending on the power or charge. When the AC Adapter is plugged in LED Color Green Orange Green Orange Blink When the AC Adapter is unplugged LED Color Green Using Hardware Reset Function If the unit is not performing correctly, use this function to set the CAM back to...
ENGLISH Getting Started Before You Start Operating the CAM Before using the CAM, refer to this page for easy operation. The Memory Stick is an optional accessory and not included. 1. Install the battery pack and insert the Memory Stick into the Memory Stick slot. 2.
Getting Started Using the Function Button The Function button is used to make a selection, move the cursor, select the functions and exit from the menu. Using the Function button Recording / Button Playing/Viewing Picture taking ▲ Zoom out ( ▼...
ENGLISH Getting Started Using the Display Button You can use various functions by pressing the [Display] button. 1. Open the LCD monitor. 2. Slide the [Mode Selector] down to turn on the CAM. ◆ The video screen appears. ◆ You can select Video mode or Previous mode as the start-up mode in System Settings. (Refer to page 96) 3.
Getting Started Adjusting the LCD Monitor The CAM is equipped with a color Liquid Crystal Display monitor, which enables you to view directly what you are recording or playing back. Depending on the conditions under which you are using the CAM (indoors or outdoors for example), you can adjust the LCD Brightness or Color.
ENGLISH Getting Started Structure of the Folders and Files The video files and photo files are stored in internal memory, Memory Stick or Memory Stick Pro as below. Notes ✤ Refer to page 34 for details about Memory Stick. ✤ You can store general data in files and folders of the CAM. ✤...
Getting Started Recording Time and Capacity Video Record Time Capacity Media approx. 21min. 512MB (SC-X105(L)) Internal Memory approx. 44min. 1GB (SC-X110(L)) 32MB 64MB Memory Stick 128MB approx. 10min. 256MB approx. 20min. Memory Stick Pro 512MB approx. 42min. Warning ✤ 352 and 720 are video resolutions. ✤...
Page 36
ENGLISH Getting Started Number of Photos that can be taken Capacity Media 800✕600 approx. 5019 512MB Internal Memory approx. 9803 approx. 313 32MB approx. 627 Memory Stick 64MB approx. 1254 128MB approx. 2509 256MB Memory Stick approx. 5019 512MB approx. 9803 Notes ✤...
Getting Started Selecting the Memory Type You can select the memory type - internal memory or external memory(Memory Stick, Memory Stick Pro). The Memory Stick is an optional accessory. The video file and the photo files are stored in internal memory by default. To store on a Memory Stick, ‘External’...
✤ The data stored on the stick may be changed or lost as a result of misuse, static electricity, electric noise or repair. Save important files separately. ✤ Samsung is not responsible for data loss due to misuse. ✤ Memory Stick and ✤...
Getting Started Mode and Menu Selection You can select the mode and menu as follows. There are 2 ways of selecting menu. Select the way you prefer. Mode Selection Slide the [Mode Selector] down to turn on the CAM and slide it down again. Slide the [ ▲...
Video Mode : Recording Recording You can record video and store it in memory. Refer to the page 108 for recording video using the External Camera Module. (SC-X105L/X110L only) 1. Slide [Mode Selector] down to turn on the CAM. ◆ The Video Record screen appears.
ENGLISH Video Mode : Recording Zooming In and Out Zooming lets you change the size of the subject captured in a scene. 1. Slide [Mode Selector] down to turn on the CAM. ◆ You can select Video mode or Previous mode as the start-up mode in System Settings. (Refer to page 96) 2.
3. “Choose the type of line-in source” message appears. Slide the [ ▲ /▼ ] switch to select <External Camera> when using the *external camera or <Normal> when using just the camcorder, then press the [OK] button. If *<External Camera> is selected, “External” appears on the screen.
ENGLISH Video Mode : Playing Playing on the LCD Monitor You can view playback of video files on the LCD monitor. 1. Slide [Mode Selector] down to turn on the CAM. ◆ The Video Record screen appears. 2. Press the [Menu] button and slide the [ ▲ /▼ ] switch. Press the [OK] button after selecting <Play>.
Video Mode : Playing The button and switch you use when playing the video file [OK] Button: Play or pause the video file [▲ ] Switch: In Video Play mode: Press it to move to previous file. Press and hold it to use RPS function. (RPS rate: 2x [▼...
ENGLISH Video Mode : Selecting File Options Deleting Video files You can delete video files in <File Options>. 1. Slide [Mode Selector] down to turn on the CAM. ◆ The Video Record screen appears. 2. Press the [Menu] button and slide the [ ▲ /▼ ] switch. Press the [OK] button after selecting [Play].
Video Mode : Selecting File Options Locking Video files You can lock the important video file to prevent accidental deletion. 1. Slide [Mode Selector] down to turn on the CAM. ◆ The Video Record screen appears. 2. Press the [Menu] button and slide the [ ▲ /▼ ] switch. Press the [OK] button after selecting <Play>.
ENGLISH Video Mode : Selecting File Options Copying Video files This allows you to copy files back and forth between the internal and external memory. 1. Slide [Mode Selector] down to turn on the CAM. ◆ The Video Record screen appears. 2.
Video Mode : Selecting File Options Setting the PB(Play Back) Option You can play all files continuously or play the selected file only. 1. Slide [Mode Selector] down to turn on the CAM. ◆ The Video Record screen appears. 2. Press the [Menu] button and slide the [ ▲ /▼ ] switch. Press the [OK] button after selecting <Play>.
ENGLISH Video Mode : Setting Various Functions Setting the Video file Size You can set the video files size. The file storage capacity depends on the Memory Stick and video file size. 1. Slide [Mode Selector] down to turn on the CAM. ◆...
Video Mode : Setting Various Functions Setting the Video file Quality You can set the video files quality. The files storage capacity depends on the Memory Stick and video file quality. 1. Slide [Mode Selector] down to turn on the CAM. ◆...
ENGLISH Video Mode : Setting Various Functions Setting the Focus You can set the focus depending on the subject or environment. In most situations, it is best to use the AF(Auto Focus). 1. Slide [Mode Selector] down to turn on the CAM. ◆...
Video Mode : Setting Various Functions Setting the EIS (Electronic Image Stabilizer) The Electrical Image Stabilizer is a function that compensates for hand shake and other movements while recording. EIS provides more stable video when: ◆ Recording with zooming ◆ Recording small objects ◆...
ENGLISH Video Mode : Setting Various Functions Setting the White Balance The White Balance may vary depending on the lighting conditions. The White Balance is used to preserve natural colors under different lighting conditions. 1. Slide [Mode Selector] down to turn on the CAM. ◆...
Video Mode : Setting Various Functions Setting the Program AE (Programmed Auto Exposure) Program AE allows you to adjust the aperture setting to suit different conditions. 1. Slide [Mode Selector] down to turn on the CAM. ◆ The Video Record screen appears. 2.
ENGLISH Video Mode : Setting Various Functions Setting the BLC (Backlight Compensation) The Backlight Compensation function helps to make the subject brighter when the subject is in front of a window or the subject is too dark to distinguish. You can use this function when using your the CAM in bright or snowy backgrounds.
Video Mode : Setting Various Functions Setting the Effect You can create professional looking effects on your video file. 1. Slide [Mode Selector] down to turn on the CAM. ◆ The Video Record screen appears. 2. Press the [Menu] button and slide the [ ▲ /▼ ] switch. Press the [OK] button after selecting <Settings>.
ENGLISH Video Mode : Setting Various Functions Setting the Digital Zoom Zooming more than 10x is achieved digitally, up to 100X when combined with optical zoom. The Digital Zoom processes data to enlarge the center portion of the image to fill the frame. It may produce a less detailed and slightly grainy picture.
ENGLISH Photo Mode : Capturing Capturing Images You can take photos as well as record video files. 1. Slide [Mode Selector] down to turn on the CAM and slide it down again. ◆ The Mode Selection screen appears. 2. Slide the [ ▲ /▼ ] switch to select ◆...
Photo Mode : Capturing Zooming In and Out Zooming lets you change the size of the subject captured in a scene. 1. Slide [Mode Selector] down to turn on the CAM and slide it down again. ◆ The Mode Selection screen appears. 2.
ENGLISH Photo Mode : Viewing Viewing Photo files on the LCD Monitor The LCD monitor allows you to view your photo right after taking them. 1. Slide [Mode Selector] down to turn on the CAM and slide it down again. ◆...
Photo Mode : Selecting File Options Deleting Photo files You can delete photo files in <File Options>. 1. Slide [Mode Selector] down to turn on the CAM and slide it down again. ◆ The Mode Selection screen appears. 2. Slide the [ ▲ /▼ ] switch to select ◆...
ENGLISH Photo Mode : Selecting File Options Locking Photo files You can lock important photo files so they can not be deleted. 1. Slide [Mode Selector] down to turn on the CAM and slide it down again. ◆ The Mode Selection screen appears. 2.
Photo Mode : Selecting File Options Setting DPOF (Digital Print Order Format) Function DPOF (Digital Printing Order Format) creates print information for photos you select and numbers them on the Memory Stick or Memory Stick Pro. You can easily make prints on a DPOF compatible printer or order copies. 1.
ENGLISH Photo Mode : Selecting File Options Copying Photo files You can copy photo files to the internal or external memory. 1. Slide [Mode Selector] down to turn on the CAM and slide it down again. ◆ The Mode Selection screen appears. 2.
Photo Mode : Setting Various Functions Setting the Photo file Size You can set the photo files size. The amount of photo files that can be stored depends on the Memory Stick capacity and photo file size. 1. Slide [Mode Selector] down to turn on the CAM and slide it down again. ◆...
ENGLISH Photo Mode : Setting Various Functions Setting the Light The Light only works in Photo Mode and allows the user to take photos where there is insufficient light. 1. Slide [Mode Selector] down to turn on the CAM and slide it down again. ◆...
Photo Mode: Setting Various Functions Setting the Focus You can set the focus depending on the subject or the environment. In most situations, you can record the best photo using AF(Auto Focus). 1. Slide [Mode Selector] down to turn on the CAM and slide it down again. ◆...
ENGLISH Photo Mode : Setting Various Functions Setting the EIS (Electronic Image Stabilizer) The Electrical Image Stabilizer is a function that compensates for hand shake and other movements while taking pictures. Refer to page 49 for further details. 1. Slide [Mode Selector] down to turn on the CAM and slide it down again. ◆...
Photo Mode : Setting Various Functions Setting the White Balance The White Balance may vary depending on the lighting conditions. The White Balance is used to preserve natural colors under different lighting conditions. 1. Slide [Mode Selector] down to turn on the CAM and slide it down again. ◆...
ENGLISH Photo Mode : Setting Various Functions Setting the Program AE (Programmed Auto Exposure) It allows you to adjust the aperture setting to suit different conditions. 1. Slide [Mode Selector] down to turn on the CAM and slide it down again. ◆...
Photo Mode : Setting Various Functions Setting the BLC (Backlight Compensation) The Backlight Compensation function helps to make the subject brighter when the subject is in front of a window or the subject is too dark to distinguish. You can use this function when using the CAM in situations with bright backgrounds.
ENGLISH MP3 Mode : Storing Music in the CAM Copying Music files to the CAM You can transfer music files from your PC to the internal memory, Memory Stick or Memory Stick Pro. For copying music files, the CAM must be connected to your PC with the USB cable. 1.
MP3 Mode : Playing Playing Music files You can hear the music copied from your PC directly or with the Memory Stick. 1. Connect the earphones to the CAM. ◆ You can also hear the music from the Built-in speaker without the earphones. 2.
ENGLISH MP3 Mode : Selecting Play Options Setting Repeat Play You can play the only one or all music files repeatedly. 1. Connect the earphones to the CAM. ◆ You can also hear the music from the Built-in speaker without the earphones. 2.
MP3 Mode : Selecting File Options Deleting Music files You can delete the music file you want. 1. Slide [Mode Selector] down to turn on the CAM and slide it down again. ◆ The Mode Selection screen appears. 2. Slide the [ ▲ /▼ ] switch to select MP3 mode and press the [OK] button. ◆...
ENGLISH MP3 Mode : Selecting File Options Locking Music files You can lock important music files so they can not be deleted. 1. Slide [Mode Selector] down to turn on the CAM and slide it down again. ◆ The Mode Selection screen appears. 2.
MP3 Mode : Selecting File Options Copying Music files You can copy the music file to the internal or external memory. 1. Slide [Mode Selector] down to turn on the CAM and slide it down again. ◆ The Mode Selection screen appears. 2.
ENGLISH Voice Recorder Mode : Recording Recording Voice You can record voice using the built-in microphone in the CAM. 1. Slide [Mode Selector] down to turn on the CAM and slide it down again. ◆ The Mode Selection screen appears. 2.
Voice Recorder Mode : Playing Playing Voice files You can hear the voice file connecting earphones. 1. Slide [Mode Selector] down to turn on the CAM and slide it down again. ◆ The Mode Selection screen appears. 2. Slide the [ ▲ /▼ ] switch to select press the [OK] button.
ENGLISH Voice Recorder Mode : Selecting File Options Deleting Voice files You can delete voice files you no longer want. 1. Slide [Mode Selector] down to turn on the CAM and slide it down again. ◆ The Mode Selection screen appears. 2.
Voice Recorder Mode : Selecting File Options Locking Voice files You can lock important voice files so they can not be deleted. 1. Slide [Mode Selector] down to turn on the CAM and slide it down again. ◆ The Mode Selection screen appears. 2.
ENGLISH Voice Recorder Mode : Selecting File Options Copying Voice files You can copy the voice file to the internal or external memory. 1. Slide [Mode Selector] down to turn on the CAM and slide it down again. ◆ The Mode Selection screen appears. 2.
Using File Browser Deleting Files or Folders You can delete the file(AVI, MP3, JPEG, WAV) or folders you recorded. 1. Slide the [Mode Selector] down to turn on the CAM and slide it down again. ◆ The Mode Selection screen appears. 2.
ENGLISH Using File Browser Locking Files You can lock the important files so they can not be deleted. 1. Slide the [Mode Selector] down to turn on the CAM and slide it down again. ◆ The Mode Selection screen appears. 2.
Using File Browser Copying Files or Folders You can copy the file or folder to the internal or external memory. 1. Slide the [Mode Selector] down to turn on the CAM and slide it down again. ◆ The Mode Selection screen appears. 2.
ENGLISH Using File Browser Viewing File Information You can see the file name, format, size and date. 1. Slide the [Mode Selector] down to turn on the CAM and slide it down again. ◆ The Mode Selection screen appears. 2. Slide the [ ▲ /▼ ] switch to select 3.
ENGLISH Setting the CAM : Adjusting the LCD Monitor Adjusting the LCD Brightness You can adjust the brightness of the LCD monitor to compensate for ambient lighting conditions. 1. Slide [Mode Selector] down to turn on the CAM and slide it down again. ◆...
Setting the CAM : Adjusting the LCD Monitor Adjusting the LCD Color You can adjust the color of the LCD monitor depending on the situation. 1. Slide [Mode Selector] down to turn on the CAM and slide it down again. ◆...
ENGLISH Setting the CAM : Adjusting Date/Time Setting Time You can adjust the time. 1. Slide [Mode Selector] down to turn on the CAM and slide it down again. ◆ The Mode Selection screen appears. 2. Slide the [ ▲ /▼ ] switch to select 3.
Setting the CAM : Adjusting Date/Time Setting Date You can adjust the date. 1. Slide [Mode Selector] down to turn on the CAM and slide it down again. ◆ The Mode Selection screen appears. 2. Slide the [ ▲ /▼ ] switch to select 3.
ENGLISH Setting the CAM : Adjusting Date/Time Setting Date Format You can select the date format to display. 1. Slide [Mode Selector] down to turn on the CAM and slide it down again. ◆ The Mode Selection screen appears. 2. Slide the [ ▲ /▼ ] switch to select 3.
Setting the CAM : Adjusting Date/Time Setting Time Format You can select the time format to display. 1. Slide [Mode Selector] down to turn on the CAM and slide it down again. ◆ The Mode Selection screen appears. 2. Slide the [ ▲ /▼ ] switch to select 3.
ENGLISH Setting the CAM : Setting the System Setting the Auto Shut off To save battery power, you can set the Auto Shut off function. 1. Slide [Mode Selector] down to turn on the CAM and slide it down again. ◆...
Setting the CAM : Setting the System Setting the Demo Function The Demo function allows you to view a demonstration of the functions that the CAM supports. 1. Slide [Mode Selector] down to turn on the CAM and slide it down again. ◆...
ENGLISH Setting the CAM : Setting the System Setting Start-up Mode You can select the start-up mode of the CAM. 1. Slide [Mode Selector] down to turn on the CAM and slide it down again. ◆ The Mode Selection screen appears. 2.
Setting the CAM : Setting the System Setting the File No. Function You can set the file numbers so that they reset each time Memory stick is formatted, or so that they are displayed incrementally. 1. Slide [Mode Selector] down to turn on the CAM and slide it down again. ◆...
ENGLISH Setting the CAM : Setting the System Setting the Beep Sound You can set the beep sound on/off. When on, a beep will sound every time a button is pressed. 1. Slide [Mode Selector] down to turn on the CAM and slide it down again. ◆...
Settings: System Demo Video Mode Start-up Reset File No. Beep Sound Version Info Settings: System Demo Samsung Elec. Co. LTD Miniket DSP 0.01X Language English Mar 04 2005 22:09:25 Previous Mode Start-up Micom 0.02X Mar 07 2005 01:09:26 Sys. Sound...
ENGLISH Setting the CAM : Setting Memory Selecting the Storage Type Select the storage type(Internal or Memory Stick, Memory Stick Pro) before recording or taking pictures. 1. Slide [Mode Selector] down to turn on the CAM and slide it down again. ◆...
Setting the CAM : Setting Memory Formatting the Memory You can format the internal memory, Memory Stick or Memory Stick Pro to erase all files. 1. Slide [Mode Selector] down to turn on the CAM and slide it down again. ◆...
ENGLISH Setting the CAM : Setting Memory Viewing Memory Space You can view usable and total memory space of the CAM. 1. Slide [Mode Selector] down to turn on the CAM and slide it down again. ◆ The Mode Selection screen appears. 2.
Setting the CAM : Using USB Mode Transferring Files from the CAM to your computer 1. Connect the CAM to the PC with the USB cable. 2. Slide [Mode Selector] down to turn on the CAM. ◆ USB menu screen appears automatically. 3.
ENGLISH Setting the CAM : Using USB Mode USB Speed depending on the System Hi Speed USB is not guaranteed if supplied driver is not installed or on an OS other than Microsoft Windows and Apple's Mac OS X. ✤ Windows 98SE/ME: Full Speed USB ✤...
Setting the CAM : Using USB Mode Using PC Cam You can use this the CAM as a PC camera for video chatting, video conference and other PC camera applications. 1. Connect the CAM to the PC with the USB cable. 2.
ENGLISH Setting the CAM : Using USB Mode Connecting the CAM to a Printer By connecting the CAM to printers with PictBridge support (sold separately), you can send images from the internal memory or external memory (Memory Stick or Memory Stick Pro) directly to the printer with a few simple operations.
Using the External Camera Module (SC-X105L/X110L only) Connecting the External Camera Module Connecting the External Camera Module to CAM ..108 Recording Video Using the External Camera Module . . . 108 Wearing the External Camera Module Connecting the extension cable while the set is in the Carrying Case .
ENGLISH Using the External Camera Module : Connecting the External Camera Module (SC-X105L/X110L only) Connecting the External Camera Module to CAM 1. Connect the extension cable to the AV Input/Output terminal of the CAM. You can connect the External Camera Module Controller’s connector to the AV Input/Output terminal of the CAM.
Using the External Camera Module : Wearing the External Camera Module (SC-X105L/X110L only) C onnecting the extension cable while the set is in the Carrying Case 1. Insert the set into the Carrying Case while its battery faces front side. 2.
Module (SC-X105L/X110L only) Using the Short and Long Mount Bands While the camcorder is inside your bag or backpack, you can attach the External Camera Module mounted on the Rubber Mount to anywhere with help of the Short and Long Mount Bands.
Miscellaneous Information Connecting the CAM with other Devices Connecting the CAM to TV ..... . . 112 Connecting the CAM to VCR ..... . 113 Copying Video files to a VCR Tape .
ENGLISH Miscellaneous Information: Connecting the CAM to other Devices Connecting the CAM to TV You can connect the CAM to a TV set directly to play video files on the TV monitor. 1. Connect the Audio/Video cable to the AV Input/Output Jack of the CAM or cradle. 2.
Miscellaneous Information: Connecting the CAM with other Devices Connecting the CAM to a VCR You can connect the CAM to VCR to copy the recorded files to the video tape. 1. Connect the Audio/Video cable to the AV Input/Output Jack of the CAM or cradle. 2.
ENGLISH Miscellaneous Information: Connecting the CAM to other Devices Copying Video files to a VCR Tape You can copy your recorded files to a regular blank video tape. Connect the CAM to a VCR using the Audio/Video cable before recording. 1.
Miscellaneous Information: Connecting the CAM to other Devices Recording unscramble contents from other digital devices You can connect other external digital devices to CAM to record unscrambled contents. 1. Connect the AV input/output cable to the AV input/output Jack of the CAM or Cradle. 2.
ENGLISH Miscellaneous Information: Connecting the CAM to other Devices Connecting the CAM to a PC using the USB cable You can connect the CAM to a PC that supports USB connections. Use the provided USB cable for connection to a PC. 1.
Miscellaneous Information: Installing Programs Installing Image Mixer You can edit the video files and use the PC Camera function with this program. Windows 1. Quit all files and folders currently open on your computer. 2. Insert the program CD into the CD-ROM drive. ◆...
Page 122
ENGLISH Miscellaneous Information: Installing Programs Macintosh 1. Quit all files and folders currently open on your computer. 2. Insert the program CD into the CD-ROM drive. ◆ The Setup screen appears automatically. ◆ If not, double-click the CD-ROM icon on the Desktop, and double-click <Iminstall>.
Miscellaneous Information: Installing Programs Installing software for using PC-Cam Windows 1. Close all windows currently opened and insert the provided software CD into the CD-ROM drive. 2. Place the CAM on the cradle and connect the USB cable to the USB port of the cradle. USB Mode screen appears.
ENGLISH Miscellaneous Information: Installing Programs Installing Windows98SE Driver (For Windows98SE only) To use the CAM as a removable drive on Windows98SE, you may need to install the Windows98SE Driver. 1. Close all windows currently opened and insert the provided software CD into the CD-ROM drive. 2.
Page 125
Miscellaneous Information: Connecting the CAM with other Devices Disconnecting USB Connection After completing the data transfer, you must disconnect the cable in the following way. 1. Select the removable disk icon on your computer screen and click the right mouse button to select ‘Safely Remove Hardware’.
ENGLISH Miscellaneous Information: Printing Photos Printing with PictBridge Function With the PictBridge Support, you can control the printer directly through the CAM in order to print out stored pictures. For direct printing of your stored pictures using the PictBridge function, you must connect the CAM to a PictBridge printer using a USB cable.
Miscellaneous Information: Printing Photos Printing Photos with DPOF Files DPOF (Digital Printing Order Format) creates print information for photos you select and numbers them on the Memory Stick or Memory Stick Pro. You can easily make prints on a DPOF compatible printer or order copies. Printing DPOF files of the Memory Stick 1.
ENGLISH Maintenance : Cleaning and Maintaining the CAM After using the CAM ✤ For the safekeeping of the CAM, follow these steps. ✓ Turn the CAM off. ✓ Remove the Battery Pack (refer to page 20). ✓ Remove the Memory Stick (refer to page 34). ✤...
Maintenance : Cleaning and Maintaining the CAM Cleaning the Body ✤ To Clean the Exterior of the CAM ✓ To clean the exterior, use a soft dry cloth. Wipe the body gently. Do not apply excessive force when cleaning, gently rub the surface. ✓...
- Put the battery pack in a pocket to warm it up, and insert it in your Sports Camcorder immediately prior to use. - Use a large capacity battery pack (Optional).
Maintenance : Cleaning and Maintaining the CAM Using the CAM Abroad ✤ Each country or region has its own electric and color systems. ✤ Before using the CAM abroad, check the following items: Power Sources ✤ the CAM You can use in any country or area with the supplied AC Power Adapter where the power input range is 100V ~ 240V, 50/60Hz.
Memory Stick is protected to write. MPEG decoding error The video file is corrupted. ✤ If these instructions do not solve your problem, contact your nearest Samsung dealer or authorized service center/personnel. Symptom No power is supplied Date/Time is wrong...
Page 133
Troubleshooting Symptom Color balance of picture is not natural White balance adjustment is required Digital zoom does not work Digital special effect is applied Files stored in the Memory Stick Memory Stick is protected cannot be deleted File is locked Images on the LCD monitor appear Ambient is too bright dark...
ENGLISH Using the Menu Video 1. Record 2. Video In External Camera White Balance Normal Auto Hold 3. Play Outdoor Indoor 4. File Options Program AE Delete Auto Selected Sports Spotlight Cancel Sand/Snow Lock HS Shutter Selected Cancel Copy To Selected Effect Cancel...
Using the Menu Voice Recorder File Browser 1. Record 1. Delete 2. Play Selected 3. File Options Cancel Delete Selected 2. Lock Selected Cancel Lock Cancel Selected 3. Copy To Cancel Selected Copy To Selected Cancel Cancel 4. File Info Back Close 4.
ENGLISH Specifications Model Name the CAM System Video Recording System Photo System Voice Memory Recording/Playing time CCD Pixel Zoom Ratio Focal Length Minimum Illumination LCD Monitor Cradle Connectors The CAM Connector AV Input/Output DC Power In Connector General Operating Temperature Operating Humidity Power Source Power Consumption...
Page 137
Specifications Model Name The CAM Connectors Earphone Common connector AV Input/Output Cradle Connector DC Power In Connector AC Adapter Power Requirement DC Output Dimensions Weight Model Name the External CMOS Camera CMOS Pixel Video Resolution Exposure White Balance Focus Type Focal Length Connector AV Output...
ENGLISH Index - A - AF...48, 65 Auto Shut off ...94 - B - Beep Sound ...98 BLC ...52, 69 - C - Capturing...56 Cleaning and Maintaining the CAM...124 - D - Date ...91 Demo...95 Digital Zoom ...54 Display button ...28 DPOF ...61, 123 - E - Effect ...53...
Page 139
Index Memory Stick ...34 Memory type ...33 Menu button ...14 MF ...48, 65 - O - OSD...17 - P - PB Option...45 PictBridge ...122 Power switch ...14 Program AE...51, 68 - R - Repeat Play...74 - S - Start-up Mode ...96 Storage type...100 - T - Time...90...
Warranty (SEA users only) SAMSUNG Electronics America Inc. (SEA), warrants that this product is free from defective material and workmanship. SEA further warrants that if product fails to operate properly within the specified warranty period and the failure is due to improper workmanship or defective material, SEA will repair or replace the product at its option.
Page 144
ENGLISH THE CAMCORDER IS MANUFACTURED BY: ELECTRONICS SERVICE DIVISION 400 Valley Road, Suite 201, Mt. Arlington N.J. 07856 Tel: 1-800-SAMSUNG (1-800-726-7864) *Samsung Electronics’ Internet Home Page AD68-00876B http://www.samsung.com...