Table of Contents
Advertisement
I ENGLISH
I
Initial Setting • System Menu Setting
-:o Clock setup works in Camera Mode/Player Mode/M.Cam Mode/M.Player Mode. '-*page 26
°:* The date/time is automatically recorded onto a disc. Before recording, please set the date/time.
1. Set the [Mode] switch to [DISC] or [CARD]. (SC-DC173(U)/DC175/DC575 only)
2. Set the [Power] switch to [1_ (Camera}] or [(J_(Player)]
3. Press the [MENU] button.
= The menu list will appear.
4. Move the [Joystick] up or down to select <System>, then press the [Joystick].
5. Move the [Joystick] up or down to select <Clock Set>, then press the [Joystick].
= The month will be highlight first.
6. Move the [Joystick] up or down to set current month, then press the [Joystick].
= The day will be highlighted.
= To adjust the clock, select the Year, Month, Day, Hour, Min, or AM/PM by pressing the
[Joystick], then move the [Joystick] up or down to set respective values.
7. You can set the day, year, hour, minute, and AM/PM following the same procedure after
setting the month.
8. Press the [Joystick] after setting minute.
• A message <Complete!> is displayed.
9. To exit, press the [MENU] button.
= After the Lithium Battery loses its charge (after about 6 months), the date/time appears
on the screen as 12:00 AM JAN.01.2007.
= You can set the year up to 2040.
= If the Lithium Battery is not installed, data inputted wilt not be backed up.
= Display illustrations
in this manual
OSD illustrations of model SC-DC173U are used in this manual. Some of the OSD
items shown in this manual may differ slightly from the actual items on your DVD Camcorder.
_Move
_Select
_ExJt
_Adiust
_Seiect
_Exit
Move
_
Select
_
Exit
Advertisement
Table of Contents
