Samsung SC-D352 Owner's Instruction Book page 84

ENGLISH
IEEE 1394 Data Transfer
System Requirements
CPU: faster Intel ® Pentium III™ 450MHz compatible.
■
Operating system: Windows
■
Main memory: more than 64 MB RAM
■
IEEE1394 add-on card or built in IEEE1394 card
■
Recording with a DV Connection Cable
1. Set the Power switch to PLAYER.
2. Set the Mode switch to TAPE. (SC-D353/D354/D355 only)
3. Connect the DV cable (not supplied) from the DV jack of the Camcorder
to the DV jack of the other DV device.
Make sure that
■
4. Press the Start/Stop button to begin REC PAUSE mode.
PAUSE is displayed on the LCD screen.
■
5. Start playback on the other DV device while you monitor the picture.
6. Press the Start/Stop button to start recording.
If you want to pause recording momentarily, press the Start/Stop button again.
■
7. To stop recording, press the
[ Notes ]
■ When using this Camcorder as a recorder, the pictures that appear on a monitor may seem uneven,
however recorded pictures will not be affected.
Operation is not guaranteed for all the recommended computer environments mentioned above.
■
80 80
98SE, ME, XP, Mac OS (9.1~10.2)
®
is displayed on the LCD screen.
(STOP) button.
DV
DV
USB
USB
AV
MIC
AV
MIC