Defects, causes and solutions
Defect
The oven does not heat or
heat inefficiently.
Steam production is not
started or is insufficient.
The oven switches itself off. - Fuse blown.
Alarm: lack of water.
Chamber and core sensors
Technical data
Purpose of the control device:
Construction of control device:
Program:
Dimensions:
Possible cause
- Burned resistances.
- Resistance Counters
faulty.
- Damaged electronic
controller.
- Fuse blown.
- Burned resistances.
- Resistance counter
faulty.
- Lack of water.
- Damaged electronic
controller.
- Fuse blown.
- Faulty water inlet
solenoid.
- Tap or valve of place
closed.
- Damaged core sensor or
thermocouple.
Operational control device.
Built-in electronic device.
User Interface
Black flame retardant.
User Interface
154.0 x 214.0 x 46.0 mm (6.062 x
8.425 x 1 x 810 in; L (length) x H
(height) x P (depth)).
Solution
- Replace resistor.
- Replace contactor.
- Replace electronic
controller.
- Replace fuse.
- Replace resistor.
- Replace contactor.
- Wait for the return.
- Replace electronic
controller.
- Replace fuse.
- Replace solenoid.
- Replace fuse.
- Open the valve or wait for
a new supply.
- Replace the
thermocouple or core
sensor.
Control Module
Schedule of the day.
Control Module
113.5 x 255.0 x 33.0 mm (4.488 x 10.039 x 1.299
in; L (length) x H (height) x P (depth)).