Table of Contents
Advertisement
The equipment is identified by a nameplate on which the serial number is registered. This so
that records of possible modifications made to the components can be keps, this is located on the
left side of the equipment.
IMPORTANT: READ THIS BEFORE INSTALLING THE EQUIPMENT!
BAKEMAX cannot be held liable for any material or personal injury resulting
from failure to comply with any instructions presented in this manual.
The power and other data required for installation are available in the tables in the
"Technical Characteristics" section of this manual.
The equipment should only be installed in accordance with the standards set forth
in this manual.
Before installation, make sure that the voltage, frequency, and power are in
accordance with the points installed.
This equipment is a convertible voltage, DO NOT ATTEMPT TO CHANGE THE
VOLTAGE as it may be severely damaged and is not covered under warranty.
necessary, contact the plant for advice to our nearest service station.
The equipment must be grounded electrically.
Do not install before solving any doubts regarding the correct construction of the
installation points detailed in this manual.
IDENTIFICATION OF EQUIPMENT
If
Advertisement
Table of Contents
