Samsung HMX-R10BP User Manual page 139

WARNING INDICATORS AND MESSAGES
USB
Message
Fail Printer Connecting
Change 'USB Connect'
Fail USB Connecting
Change 'USB Connect'
Ink Error
Paper Error
File Error
Printer Error
Print Error
When there is dew condensation, put the camcorder aside for a while before using
• What is dew condensation?
Dew condensation happens when a camcorder is moved to a place where there is a
significant temperature difference from the previous place. The Dew condenses on the
external or internal parts of the camcorder, and on the reflection lens. When this happens, it
may cause a malfunction or damage to the camcorder when using the device with the power
on while there is dew condensation.
• What can I do?
Turn the power off and detach the battery pack, and leave it in a dry area for 1~2 hours
before using it.
• When does the dew condensation occur?
When the device is relocated to a place with a higher temperature than the previous location,
or when using it in a hot area suddenly, it will cause condensation.
- When recording outside in cold weather during the winter and then using it in indoors.
- When recording outside in hot weather after being indoors or inside a car where the A/C
was running.
Icon Informs that...
A problem occurred when
- connecting the camcorder
via USB to a printer.
A problem occurred when
- connecting the camcorder
via USB to a PC.
There is a problem with the
-
ink cartridge.
There is a problem with the
-
paper.
There is a problem with the
-
file.
There is a problem with the
-
printer.
A problem occurred during
-
printing.
Action
• Check the USB cable.
• Try the connection procedure again.
• Switch "USB connect" function to
"PictBridge."
• Check the USB cable.
• Try the connection procedure again.
• Switch "USB connect" function to
"Mass Storage."
• Check the ink cartridge.
• Put a new ink cartridge in the
printer.
• Check the paper in the printer. If
there is no paper, insert the paper.
• Your camcorder does not support
this file format.
• Try another file recorded on your
camcorder.
• Turn the printer's power off and on.
• Contact the printer manufacturer's
service centre.
• Do not remove power source or
eject memory card during printing.
139