system setting
TV Display
You can enable or disable the On Screen Display (OSD) that appears on the TV screen when
connecting your camcorder to a TV.
1.
Touch the Menu (
2.
Touch a desired submenu item.
To exit the menu, touch the Exit ( ) or Return (
3.
Submenu items
• Off : The OSD (On Screen Display) menus are only
shown on the LCD screen.
• On : The OSD menus are shown on the LCD screen
and the TV screen as well.
The thumbnail display, demo, and the iCHECK (
even if you set "TV Display" to "Off."
TV Type
You need to convert the aspect ratio of the camcorder to match your TV.
PRECHECK!
Using the Component/AV Cable provided with your camcorder, connect the camcorder to your TV. page 119~123
Touch the Menu (
1.
2.
Touch a desired submenu item.
3.
To exit the menu, touch the Exit ( ) or Return (
Submenu items
• 16:9 : Select this to view images on a 16:9 (wide) TV.
• 4:3 : Select this to view images on a 4:3 (standard) TV.
• This function works only when the camcorder is connected to a TV.
• This function is not available if "Analogue TV Out: Component Auto" is set.
• TV type is automatically selected when connecting with an HDMI cable. So you don't
10
need to use this setting when using an HDMI cable.
) Setting ( ) tab "TV Display."
) Setting ( ) tab "TV Type."
TV Connect Guide
TV Display
) tab.
REC Lamp
6 /
Default Set
TV Display
1 / 1
/iCHECK) screens are shown on the TV
PC Software
USB Connect
) tab.
TV Type
/
Analogue TV Out
TV Type
1 / 1
90
MIN
Off
On
90
MIN
16:9
4:3