Samsung HMX-H100N User Manual page 140

Storage Media
Symptom
Memory card functions are not operable.
Image cannot be deleted.
You cannot format the memory card.
The data file name is not indicated
correctly.
Adjusting the image during recording
Symptom
Focus does not adjust automatically.
The image appears too bright or flickering,
or changes in color.
Image's color balance is not natural.
The subject may appear bent when
passing through the frame quickly.
126_ English
Explanation/Solution
• Insert a memory card into your camcorder properly. page 28
• If you use a memory card formatted on a computer, format it again directly on your
camcorder. page 82
• Release the lock on the write-protect tab of the memory card, if any. page 30
• You cannot move or delete the protected images. Release the protection of the
image on the device. page 99
• Release the lock on the write-protect tab of the memory card, if any. page 30
• The memory card is not supported on your camcorder or the card has some
problems.
• The file may be corrupted.
• The file format is not supported by your HD camcorder.
• Only the file name is displayed if the directory structure complies with the
international standard.
Explanation/Solution
• Set "Focus" to "Auto." page 69
• The recording conditions are not suitable for auto focus.
Adjust the focus manually. page 69
• The lens is dusty on the surface. Clear the lens and check the focus.
• Recording is being made in a dark location.
Use a light to brighten the area.
• This may occur when you make a recording under a fluorescent sodium or mercury
lamp. Cancel "iSCENE" to avoid or minimize this phenomenon.
page 59
• White balance adjustment is required. Adjust to the proper "White Balance."
page 62
• This is called the focal plane phenomenon. This is not a malfunction. Because
of the way the image device (CMOS sensor) reads out video signals, the subject
passing by the frame rapidly may appear to bend, depending on the recording
condition.